AutoCodes – Chevrolet – P1477 2018 Chevrolet Silverado

P1477 2018 Chevrolet Silverado Code - Particulate Matter Sensor Temperature Circuit Low Voltage

Quick Answer

The Particulate Matter (PM) sensor monitors the amount of the particulates (soot) in the diesel exhaust gas exiting the tailpipe. Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1477 2018 Chevrolet Silverado indicates Particulate Matter Sensor Temperature Circuit Low Voltage.
Common causes: Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 418

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 01, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1477 2018 Chevrolet Silverado Description

The Particulate Matter (PM) sensor monitors the amount of the particulates (soot) in the diesel exhaust gas exiting the tailpipe. The PM sensor is similar to the heated oxygen sensor with a ceramic element but also includes an individually calibrated Sensor Control Unit (SCU). The sensing element includes comb-shaped Interdigital Electrodes (IDE), a heater and a positive temperature coefficient resistor for temperature measurement.
The operation of the PM Sensor is based on the electrical conductivity characteristic of the diesel particulate. As the exhaust gas flows over the sensing element, soot is absorbed in the combs between the electrodes, eventually creating a conductive path. When the path is formed, it generates a current based on the voltage being applied to the element. The measurement process continues until a preset current value is reached. To avoid misleading readings, the sensor performs a regeneration where the soot is cleaned off by heating up the element before the measurement phase begins. The amount of regenerations is based on vehicle strategy; when the calibrated number of regenerations is reached, the cumulative current readings are used to determine the amount of soot concentration in the exhaust gas which in turn determines the collection efficiency of the Diesel Particulate Filter (DPF).
The Diagnostic Trouble Code (DTC) will be set when the particular matter sensor control unit detects a fault in the particulate matter sensor circuitry.

OBDII Code P1477 2018 Chevrolet Silverado - Particulate Matter Sensor Temperature Circuit Low Voltage - AutoCodes.com — P1477 2018 Chevrolet Silverado Code - Particulate Matter Sensor Temperature Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P1477 2018 Chevrolet Silverado?

Faulty Exhaust Particulate Matter Sensor
Exhaust Particulate Matter Sensor harness is open or shorted
Exhaust Particulate Matter Sensor circuit poor electrical connection

How to Fix the DTC P1477 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1477 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1477 2018 Chevrolet Silverado code?

Need more information on how to fix the P1477 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1477 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1477 2018 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code P1477 in a 2018 Chevrolet Silverado?

The common symptoms of OBDII code P1477 in a 2018 Chevrolet Silverado include poor engine performance, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P1477 on a 2018 Chevrolet Silverado indicate?

OBDII code P1477 on a 2018 Chevrolet Silverado indicates an issue with the Particulate Matter Sensor Temperature Circuit registering low voltage.

3. What are some possible causes of OBDII code P1477 in a 2018 Chevrolet Silverado?

Possible causes of OBDII code P1477 in a 2018 Chevrolet Silverado include a faulty particulate matter sensor, damaged wiring or connectors, or a malfunctioning engine control module (ECM).

4. How can I diagnose the OBDII code P1477 in my 2018 Chevrolet Silverado?

Diagnosing OBDII code P1477 in a 2018 Chevrolet Silverado typically involves using a diagnostic scanner to retrieve the trouble codes, inspecting the particulate matter sensor and related wiring, and testing the sensor's voltage levels.

5. Can I continue driving my 2018 Chevrolet Silverado with OBDII code P1477?

It is not recommended to continue driving your 2018 Chevrolet Silverado with OBDII code P1477, as it can lead to increased emissions, poor engine performance, and potential damage to other components.

6. How can I repair OBDII code P1477 in my 2018 Chevrolet Silverado?

Repairing OBDII code P1477 in a 2018 Chevrolet Silverado may involve replacing the faulty particulate matter sensor, repairing damaged wiring or connectors, or reprogramming the engine control module (ECM) if necessary.

7. Is it possible to reset OBDII code P1477 in a 2018 Chevrolet Silverado without fixing the underlying issue?

While clearing the trouble codes may temporarily turn off the check engine light, it is essential to address the root cause of OBDII code P1477 in a 2018 Chevrolet Silverado to prevent further issues.

8. Can a DIY enthusiast fix OBDII code P1477 in a 2018 Chevrolet Silverado?

A DIY enthusiast with the necessary tools and knowledge of automotive repairs may be able to fix OBDII code P1477 in a 2018 Chevrolet Silverado, but it is recommended to consult a professional mechanic for accurate diagnosis and repairs.

9. How much does it cost to repair OBDII code P1477 in a 2018 Chevrolet Silverado?

The cost to repair OBDII code P1477 in a 2018 Chevrolet Silverado can vary depending on the extent of the issue, the parts needed for replacement, and the labor rates of the repair shop. It is advisable to obtain quotes from multiple mechanics for an accurate estimate.

10. How can I prevent OBDII code P1477 from recurring in my 2018 Chevrolet Silverado?

To prevent OBDII code P1477 from recurring in your 2018 Chevrolet Silverado, it is essential to perform regular maintenance checks, address any underlying issues promptly, and follow the manufacturer's recommended service schedule.