P1469 2021 GMC Sierra Code - EVAP Purge Pump Speed Too Low
Quick Answer
Purge capacity is being reduced by technologies that improve fuel economy. Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1469 2021 GMC Sierra indicates EVAP Purge Pump Speed Too Low.
- Common causes
- Common causes include Faulty Evaporative Emission Purge Pump, Evaporative Emission Purge Pump harness is open or shorted, Evaporative Emission Purge Pump circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1469 2021 GMC Sierra Description
What are the Possible Causes of the DTC P1469 2021 GMC Sierra?
- Faulty Evaporative Emission Purge Pump
- Evaporative Emission Purge Pump harness is open or shorted
- Evaporative Emission Purge Pump circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1469 2021 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1469 2021 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1469 2021 GMC Sierra code?
Need more information on how to fix the P1469 2021 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1469 2021 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1469 2021 GMC Sierra Code
1. What are the common symptoms of OBDII code P1469 on a 2021 GMC Sierra related to the EVAP Purge Pump Speed Too Low?
- Common symptoms include the illumination of the check engine light, rough idling, poor fuel efficiency, and potential difficulty starting the vehicle.
2. What are some possible causes of the EVAP Purge Pump Speed Too Low code (P1469) on a 2021 GMC Sierra?
- Possible causes may include a faulty purge control solenoid, a malfunctioning EVAP purge pump, a clogged EVAP canister, or issues with the wiring or connectors in the EVAP system.
3. How can I diagnose the underlying issue causing code P1469 on my 2021 GMC Sierra?
- Diagnosis typically involves using an OBDII scanner to retrieve the specific trouble code, inspecting the EVAP system components for any visible damage or blockages, and testing the purge control solenoid and pump for proper operation.
4. What steps can I take to repair OBDII code P1469 on my 2021 GMC Sierra?
- Repairing this code may involve replacing the faulty purge control solenoid or EVAP purge pump, clearing any obstructions in the EVAP system, or repairing any damaged wiring or connectors in the system.
5. Is it safe to continue driving my 2021 GMC Sierra with the EVAP Purge Pump Speed Too Low code (P1469) illuminated?
- While the vehicle may still be operational with this code present, it is recommended to address the issue promptly to prevent potential damage to other components and ensure optimal fuel efficiency.
6. Can I reset the check engine light after resolving the EVAP Purge Pump Speed Too Low code on my 2021 GMC Sierra?
- Yes, once the underlying issue triggering the code has been repaired, you can reset the check engine light using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.
7. How much does it typically cost to repair OBDII code P1469 on a 2021 GMC Sierra at a professional mechanic or dealership?
- The cost of repair can vary depending on the specific cause of the code and labor rates in your area. It's advisable to obtain quotes from different service providers for an accurate estimate.
8. Can I prevent OBDII code P1469 from reoccurring on my 2021 GMC Sierra in the future?
- Regular maintenance of the EVAP system, including checking for leaks, replacing components as needed, and ensuring proper fuel cap sealing, can help prevent the recurrence of this code.
9. Are there any recalls or technical service bulletins related to the EVAP Purge Pump Speed Too Low issue on the 2021 GMC Sierra?
- It's recommended to check with a GMC dealership or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any relevant recalls or technical service bulletins for this specific problem.
10. Will driving my 2021 GMC Sierra with the EVAP Purge Pump Speed Too Low code (P1469) affect the vehicle's overall performance or emissions?
- Driving with this code may lead to decreased fuel efficiency, potential performance issues such as rough idling, and increased emissions. It's best to address the problem promptly to maintain optimal vehicle performance and emissions compliance.
Discuss the causes and fixes for P1469 2021 GMC Sierra OBDII Code
Code P1469 2021 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
