AutoCodes – Ford – P1451 2008 Ford Fusion

P1451 2008 Ford Fusion Code - EVAP Control System Canister Vent Solenoid Circuit Malfunction

Quick Answer

The Powertrain Control Module (PCM) monitors the Canister Vent (CV) solenoid circuit for an electrical failure. Common causes include Faulty Canister Vent Solenoid, Canister Vent Solenoid harness is open or shorted, Canister Vent Solenoid electrical circuit poor connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1451 2008 Ford Fusion indicates EVAP Control System Canister Vent Solenoid Circuit Malfunction.
Common causes: Common causes include Faulty Canister Vent Solenoid, Canister Vent Solenoid harness is open or shorted, Canister Vent Solenoid electrical circuit poor connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,088

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 23, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1451 2008 Ford Fusion Description

The Powertrain Control Module (PCM) monitors the Canister Vent (CV) solenoid circuit for an electrical failure. The test fails when the signal moves outside the minimum or maximum allowable calibrated parameters for a specified canister vent duty cycle by PCM command.

OBDII Code P1451 2008 Ford Fusion - EVAP Control System Canister Vent Solenoid Circuit Malfunction - AutoCodes.com — P1451 2008 Ford Fusion Code - EVAP Control System Canister Vent Solenoid Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P1451 2008 Ford Fusion?

Faulty Canister Vent Solenoid
Canister Vent Solenoid harness is open or shorted
Canister Vent Solenoid electrical circuit poor connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P1451 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1451 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1451 2008 Ford Fusion code?

Need more information on how to fix the P1451 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1451 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1451 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P1451 on a 2008 Ford Fusion?

- Common symptoms include the check engine light illuminating, rough idling, decreased fuel efficiency, and possible fuel odor.

2. What does the OBDII code P1451 for a 2008 Ford Fusion indicate?

- The code P1451 indicates a malfunction in the EVAP Control System Canister Vent Solenoid Circuit.

3. What are the possible causes of OBDII code P1451 on a 2008 Ford Fusion?

- Possible causes include a faulty canister vent solenoid, damaged wiring or connectors in the circuit, or a malfunctioning EVAP system pressure sensor.

4. How can I diagnose the EVAP Control System Canister Vent Solenoid Circuit on a 2008 Ford Fusion?

- Diagnosis involves checking the wiring and connectors for damage, testing the canister vent solenoid for proper operation, and inspecting the EVAP system pressure sensor.

5. Can I continue driving my 2008 Ford Fusion with OBDII code P1451?

- It is not recommended to drive with this code as it can lead to increased emissions, reduced fuel efficiency, and potential damage to the vehicle's emissions control system.

6. How can I repair OBDII code P1451 on my 2008 Ford Fusion?

- Repair may involve replacing the canister vent solenoid, repairing damaged wiring or connectors, or replacing the EVAP system pressure sensor.

7. Are there any DIY tips for fixing OBDII code P1451 on a 2008 Ford Fusion?

- DIY tips include checking and cleaning the connectors, inspecting the wiring for damage, and testing the canister vent solenoid with a multimeter.

8. Will resetting the check engine light resolve OBDII code P1451 on a 2008 Ford Fusion?

- Resetting the check engine light may temporarily clear the code, but it will reappear if the underlying issue causing the code is not addressed.

9. How much does it cost to repair OBDII code P1451 on a 2008 Ford Fusion?

- The cost of repair can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor.

10. Can a mechanic help diagnose and repair OBDII code P1451 on a 2008 Ford Fusion?

- Yes, a mechanic can use specialized tools and expertise to diagnose and repair the EVAP Control System Canister Vent Solenoid Circuit malfunction on a 2008 Ford Fusion.