P1446 2006 Infiniti G35 Code - EVAP Canister Vent Control Valve Close
Quick Answer
The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. Common causes include Faulty EVAP Pressure Sensor, EVAP Pressure Sensor harness is open or shorted, EVAP Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1446 2006 Infiniti G35 indicates EVAP Canister Vent Control Valve Close.
- Common causes
- Common causes include Faulty EVAP Pressure Sensor, EVAP Pressure Sensor harness is open or shorted, EVAP Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1446 2006 Infiniti G35 Description
This solenoid valve responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.
This solenoid valve is used only for diagnosis, and usually, remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.
What are the Possible Causes of the DTC P1446 2006 Infiniti G35?
- Faulty EVAP Pressure Sensor
- EVAP Pressure Sensor harness is open or shorted
- EVAP Pressure Sensor circuit poor electrical connection
- Blocked rubber tube to EVAP canister vent control valve
- EVAP Water separator
- EVAP canister is saturated with water
- Faulty EVAP canister vent control valve
How to Fix the DTC P1446 2006 Infiniti G35?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1446 2006 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1446 2006 Infiniti G35 code?
Need more information on how to fix the P1446 2006 Infiniti G35 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1446 2006 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1446 2006 Infiniti G35 Code
1. What does OBDII code P1446 on a 2006 Infiniti G35 mean?
Code P1446 indicates a problem with the EVAP canister vent control valve close function in the vehicle's emissions system.
2. What are the common symptoms of OBDII code P1446 in a 2006 Infiniti G35?
Common symptoms include the Check Engine light illuminating, decreased fuel efficiency, and potential difficulties filling the gas tank.
3. What are the possible causes of OBDII code P1446 in a 2006 Infiniti G35?
Possible causes include a malfunctioning EVAP canister vent control valve, a faulty pressure sensor, damaged vacuum hoses, or a loose gas cap.
4. How can I diagnose the issue causing OBDII code P1446 in my 2006 Infiniti G35?
Diagnosis typically involves inspecting the EVAP system components, checking for vacuum leaks, testing the vent control valve, and scanning for additional trouble codes.
5. Can I continue driving my 2006 Infiniti G35 with OBDII code P1446?
It is generally safe to drive the vehicle with code P1446, but it is recommended to address the issue promptly to prevent potential damage to the emissions system and ensure optimal performance.
6. How can I repair OBDII code P1446 in a 2006 Infiniti G35?
Repair options may include replacing the EVAP canister vent control valve, repairing or replacing damaged hoses, fixing a faulty pressure sensor, and ensuring the gas cap is properly sealed.
7. Should I reset the Check Engine light after repairing OBDII code P1446 in my 2006 Infiniti G35?
Yes, it is advisable to reset the Check Engine light using an OBDII scanner after addressing the underlying issue to ensure the system recognizes the repair and monitor for any future problems.
8. Can a DIY enthusiast fix OBDII code P1446 in a 2006 Infiniti G35?
Depending on the exact cause, DIY enthusiasts with automotive repair experience may be able to address code P1446 by replacing components like the vent control valve or checking for leaks in the system.
9. How much does it typically cost to repair OBDII code P1446 in a 2006 Infiniti G35?
The cost of repairing code P1446 can vary depending on the specific issue and labor rates in your area, but it may range from $100 to $400 for parts and labor.
10. Is it necessary to visit a mechanic for OBDII code P1446 in a 2006 Infiniti G35?
While visiting a mechanic is recommended for accurate diagnosis and professional repair, experienced DIY enthusiasts may be able to address code P1446 themselves if they have the necessary tools and knowledge.
Discuss the causes and fixes for P1446 2006 Infiniti G35 OBDII Code
Code P1446 2006 Infiniti G35 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
