P1446 2005 Nissan Sentra Code - EVAP Canister Vent Control Valve Close
Quick Answer
The EVAP canister vent control valve is located on the EVAP canister and is used to seal the canister vent. Common causes include Faulty EVAP Pressure Sensor, EVAP Pressure Sensor harness is open or shorted, EVAP Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1446 2005 Nissan Sentra indicates EVAP Canister Vent Control Valve Close.
- Common causes
- Common causes include Faulty EVAP Pressure Sensor, EVAP Pressure Sensor harness is open or shorted, EVAP Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1446 2005 Nissan Sentra Description
This solenoid valve responds to signals from the Engine Control Module (ECM). When the ECM sends an ON signal, the coil in the solenoid valve is energized. A plunger will then move to seal the canister vent. The ability to seal the vent is necessary for the on board diagnosis of other evaporative emission control system components.
This solenoid valve is used only for diagnosis, and usually, remains opened. When the vent is closed, under normal purge conditions, the evaporative emission control system is depressurized and allows EVAP Control System (Small Leak) diagnosis.
What are the Possible Causes of the DTC P1446 2005 Nissan Sentra?
- Faulty EVAP Pressure Sensor
- EVAP Pressure Sensor harness is open or shorted
- EVAP Pressure Sensor circuit poor electrical connection
- Blocked rubber tube to EVAP canister vent control valve
- EVAP Water separator
- EVAP canister is saturated with water
- Faulty EVAP canister vent control valve
How to Fix the DTC P1446 2005 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1446 2005 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1446 2005 Nissan Sentra code?
Need more information on how to fix the P1446 2005 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1446 2005 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1446 2005 Nissan Sentra Code
1. What does OBDII code P1446 on a 2005 Nissan Sentra indicate?
The code P1446 on a 2005 Nissan Sentra relates to the EVAP Canister Vent Control Valve Close malfunction.
2. What are the common symptoms of a P1446 code in a 2005 Nissan Sentra?
Common symptoms of a P1446 code in a 2005 Nissan Sentra may include difficulty starting the engine, decreased fuel efficiency, and the illumination of the check engine light.
3. What causes the P1446 code to trigger in a 2005 Nissan Sentra?
The P1446 code in a 2005 Nissan Sentra is typically triggered by a malfunction in the EVAP Canister Vent Control Valve Close, which can be caused by a faulty valve, a leak in the EVAP system, or electrical issues.
4. How serious is a P1446 code on a 2005 Nissan Sentra?
While a P1446 code may not cause immediate drivability issues, it can lead to increased emissions and potential long-term engine damage if left unresolved.
5. Can I continue driving my 2005 Nissan Sentra with a P1446 code?
It is not recommended to continue driving your 2005 Nissan Sentra with a P1446 code as it can lead to decreased fuel efficiency and increased emissions.
6. How can I diagnose a P1446 code on my 2005 Nissan Sentra?
Diagnosing a P1446 code on a 2005 Nissan Sentra involves using an OBDII scanner to retrieve the code, inspecting the EVAP system for leaks, checking the vent control valve for proper operation, and testing the electrical connections.
7. How can I repair a P1446 code on a 2005 Nissan Sentra?
Repairing a P1446 code on a 2005 Nissan Sentra may involve replacing the EVAP Canister Vent Control Valve Close, repairing any leaks in the EVAP system, or addressing any electrical issues.
8. Is it possible to reset the P1446 code on a 2005 Nissan Sentra without repairing the issue?
While you can clear the code temporarily, the check engine light is likely to reappear if the underlying issue causing the P1446 code is not addressed.
9. How much does it cost to repair a P1446 code on a 2005 Nissan Sentra?
The cost of repairing a P1446 code on a 2005 Nissan Sentra can vary depending on the specific issue, but it may range from $100 to $300 for parts and labor.
10. Can a DIY enthusiast fix a P1446 code on a 2005 Nissan Sentra?
While some aspects of diagnosing and repairing a P1446 code can be tackled by a DIY enthusiast, it is recommended to consult a professional mechanic for a thorough inspection and accurate repair.
Discuss the causes and fixes for P1446 2005 Nissan Sentra OBDII Code
-
Parts numbers change, it's better if you give the part name to the part store and they can find the part number for you. The only part number I got is: 14935-JF00A Vapor Canister Vent Solenoid
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
