AutoCodes – Scion – P1442 Scion

P1442 Scion Code - Stuck Closed In Secondary Air Injection Vacuum Switching Valve Bank 1

Quick Answer

The Engine Control Module (ECM) detects pressure change with the pressure sensor to determine malfunctioning parts in the system,and stores the DTCs. Common causes include Faulty Vacuum Switching Valve (VSV), VSV for air injection control circuit Bank 1, Air Switching Valve Bank 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1442 Scion indicates Stuck Closed In Secondary Air Injection Vacuum Switching Valve Bank 1.
Common causes: Common causes include Faulty Vacuum Switching Valve (VSV), VSV for air injection control circuit Bank 1, Air Switching Valve Bank 1.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,147

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 22, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1442 Scion Description

The Engine Control Module (ECM) detects pressure change with the pressure sensor to determine malfunctioning parts in the system,and stores the DTCs. The ECM measures pressure and/or exhaust pulsation of the system at 6 points, A to F, when the air injection system is in operation or when not in operation. When the pressure is high, the ECM determines that the pump operates. When exhaust pulsation is detected, the ECM determines that the ASV is open. The ECM determines malfunction parts based on the measured value, and stores the DTCs.
Points A and B:
ECM detects pressure changes (decrease) and determines that the ASV No.2 is open.
Points C and F:
ECM detects pressure and exhaust pulsation and determines the pressure pattern of the system.
Point D:
ECM operate the system, as indicated by the dashed lines, to determine which of the ASV No.2 is malfunctioning only when pressure changes cannot be detected at point B.
Point E:
ECM detects exhaust pulsation to determine the condition of the system.

OBDII Code P1442 Scion - Stuck Closed In Secondary Air Injection Vacuum Switching Valve Bank 1 - AutoCodes.com — P1442 Scion Code - Stuck Closed In Secondary Air Injection Vacuum Switching Valve Bank 1

What does this mean?

What are the Possible Causes of the DTC P1442 Scion?

Faulty Vacuum Switching Valve (VSV)
VSV for air injection control circuit Bank 1
Air Switching Valve Bank 1
VSV for air injection system Bank 1
Engine Control Module (ECM)

How to Fix the DTC P1442 Scion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1442 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1442 Scion code?

Need more information on how to fix the P1442 Scion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1442 Scion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.