AutoCodesPontiac – P1441 Pontiac

P1441 Pontiac Code - EVAP System Flow During Non-Purge Condition

Quick Answer

The Powertrain Control Module (PCM) monitors the amount of vacuum/pressure in the EVAP system by monitoring the fuel tank pressure sensor signal. Common causes include Faulty EVAP canister purge solenoid, Faulty Fuel Tank Pressure (FTP) sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1441 Pontiac indicates EVAP System Flow During Non-Purge Condition.
Common causes
Common causes include Faulty EVAP canister purge solenoid, Faulty Fuel Tank Pressure (FTP) sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 23,887
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 22, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1441 Pontiac Description

The Powertrain Control Module (PCM) monitors the amount of vacuum/pressure in the EVAP system by monitoring the fuel tank pressure sensor signal. The PCM seals the EVAP system by commanding the EVAP Purge Solenoid OFF and the EVAP vent valve ON. The PCM monitors the fuel tank pressure sensor in order to determine if the EVAP Purge Solenoid is leaking vacuum to the EVAP system.
OBDII Code P1441 Pontiac - EVAP System Flow During Non-Purge Condition - AutoCodes.com
P1441 Pontiac Code - EVAP System Flow During Non-Purge Condition

What are the Possible Causes of the DTC P1441 Pontiac?

  • Faulty EVAP canister purge solenoid
  • Faulty Fuel Tank Pressure (FTP) sensor

How to Fix the DTC P1441 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1441 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1441 Pontiac code?

Need more information on how to fix the P1441 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1441 Pontiac code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1441 Pontiac Code

What does the OBDII code P1441 mean for a Pontiac?

P1441 indicates that the EVAP (Evaporative Emission Control) system is detecting fuel vapor flow during a non-purge condition, which suggests a malfunction in the system.

What are the common symptoms of code P1441 in a Pontiac?

Symptoms may include the check engine light turning on, decreased fuel efficiency, and a faint fuel odor near the vehicle.

What causes code P1441 to appear on a Pontiac?

Common causes include a stuck open purge valve, a faulty EVAP pressure sensor, a damaged or disconnected EVAP hose, or a malfunctioning vent valve.

Can driving with code P1441 damage my Pontiac?

While driving with P1441 may not cause immediate damage, prolonged issues with the EVAP system can lead to increased emissions and potential harm to other components.

How can I diagnose code P1441 in a Pontiac?

Diagnosis typically involves inspecting the purge valve, vent valve, EVAP hoses, and pressure sensor for damage or malfunctions using a scan tool and performing a smoke test.

What is the purge valve, and how does it relate to code P1441?

The purge valve controls the flow of fuel vapors from the EVAP system to the engine. A stuck open purge valve can cause P1441 by allowing vapor flow during non-purge conditions.

Can a loose gas cap trigger code P1441 on a Pontiac?

A loose or damaged gas cap is unlikely to directly trigger P1441, but it can cause other EVAP-related codes. However, it’s worth inspecting the gas cap as part of the diagnosis.

How do I fix code P1441 on a Pontiac?

Repairs typically involve replacing the faulty purge valve, vent valve, or pressure sensor, securing or replacing damaged EVAP hoses, and clearing the code with an OBDII scanner.

How much does it cost to fix code P1441 on a Pontiac?

Repair costs vary but typically range from $100 to $400, depending on the specific component requiring replacement and labor charges.

Can a mechanic perform a smoke test to diagnose code P1441?

Yes, a smoke test is a common diagnostic method for identifying leaks or blockages in the EVAP system that may cause code P1441.

Discuss the causes and fixes for P1441 Pontiac OBDII Code

Code P1441 Pontiac comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play