AutoCodes – Buick – P1435 Buick

P1435 Buick Code - Particulate Matter Sensor Control Module Temperature Sensors 1-2 Not Plausible

Quick Answer

The Particulate Matter (PM) sensor monitors the amount of the particulates (soot) in the diesel exhaust gas exiting the tailpipe. Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
P1435 Buick indicates Particulate Matter Sensor Control Module Temperature Sensors 1-2 Not Plausible.
Common causes
Common causes include Faulty Exhaust Particulate Matter Sensor, Exhaust Particulate Matter Sensor harness is open or shorted, Exhaust Particulate Matter Sensor circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 358
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jul 25, 2021
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1435 Buick Description

The Particulate Matter (PM) sensor monitors the amount of the particulates (soot) in the diesel exhaust gas exiting the tailpipe. The PM sensor is similar to the heated oxygen sensor with a ceramic element, but also includes an individually calibrated Sensor Control Unit (SCU). The sensing element includes comb-shaped Interdigital Electrodes (IDE), a heater, and a positive temperature coefficient resistor for temperature measurement.
The operation of the PM Sensor is based on the electrical conductivity characteristic of the diesel particulate. As the exhaust gas flows over the sensing element, soot is absorbed in the combs between the electrodes, eventually creating a conductive path. When the path is formed, it generates a current based on the voltage being applied to the element. The measurement process continues until a preset current value is reached. To avoid misleading readings, the sensor performs a regeneration where the soot is cleaned off by heating up the element before the measurement phase begins. The amount of regenerations is based on vehicle strategy; when the calibrated number of regenerations is reached, the cumulative current readings are used to determine the amount of soot concentration in the exhaust gas which in turn determines the collection efficiency of the Diesel Particulate Filter (DPF). The Diagnostic Trouble Code (DTC) when the Particular Matter Sensor Control Unit detects an internal electrical fault or an over-temperature condition on one of the internal temperature sensors.
OBDII Code P1435 Buick - Particulate Matter Sensor Control Module Temperature Sensors 1-2 Not Plausible - AutoCodes.com
P1435 Buick Code - Particulate Matter Sensor Control Module Temperature Sensors 1-2 Not Plausible

What are the Possible Causes of the DTC P1435 Buick?

  • Faulty Exhaust Particulate Matter Sensor
  • Exhaust Particulate Matter Sensor harness is open or shorted
  • Exhaust Particulate Matter Sensor circuit poor electrical connection

How to Fix the DTC P1435 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1435 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1435 Buick code?

Need more information on how to fix the P1435 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1435 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1435 Buick Code

1. What are the common symptoms of OBDII code P1435 in a Buick related to the Particulate Matter Sensor Control Module Temperature Sensors 1-2 Not Plausible?

The common symptoms include poor engine performance, reduced fuel efficiency, and the illumination of the Check Engine Light.

2. What are some possible causes of OBDII code P1435 in a Buick related to the Particulate Matter Sensor Control Module Temperature Sensors 1-2 Not Plausible?

Potential causes include faulty temperature sensors, wiring issues, sensor module malfunctions, or a problem with the exhaust system.

3. How can I diagnose OBDII code P1435 in my Buick?

To diagnose this code, you can use an OBDII scanner to retrieve the specific trouble codes, inspect the wiring and connectors related to the temperature sensors, and test the sensors and sensor module for proper functionality.

4. Can I continue driving my Buick with OBDII code P1435 present?

It is not recommended to continue driving your vehicle with this code present, as it can lead to further damage and potential safety hazards. It's best to address the issue promptly.

5. What are some repair tips for fixing OBDII code P1435 in a Buick?

Repair tips include checking and replacing the faulty temperature sensors, repairing any damaged wiring, resetting the fault codes after repairs, and conducting a thorough inspection of the sensor module.

6. Is OBDII code P1435 a serious issue in a Buick?

While OBDII code P1435 may not cause immediate breakdown or danger, it can affect the performance and emissions of your vehicle. It's important to address the issue to ensure optimal engine function.

7. How much does it typically cost to repair OBDII code P1435 in a Buick?

The cost of repairing this code can vary depending on the extent of the issue, parts needed for replacement, and labor costs. It's advisable to consult with a professional mechanic for an accurate estimate.

8. Can I reset OBDII code P1435 in my Buick without fixing the underlying issue?

While you can reset the code using an OBDII scanner, the Check Engine Light will likely reappear if the underlying problem is not resolved. It's best to address the root cause of the issue.

9. Will OBDII code P1435 cause my Buick to fail an emissions test?

Yes, this code can cause your Buick to fail an emissions test, as it indicates a problem with the particulate matter sensor control module temperature sensors, which are crucial for monitoring emissions.

10. How can I prevent OBDII code P1435 from occurring in my Buick in the future?

To prevent this code from occurring, it's essential to maintain regular vehicle inspections, address any engine performance issues promptly, and follow the manufacturer's recommended maintenance schedule.

Discuss the causes and fixes for P1435 Buick OBDII Code

Code P1435 Buick comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play