P1406 Mazda Code - DPFE Downstream Hose Off Or Plugged
Quick Answer
P1406 Mazda indicates DPFE Downstream Hose Off Or Plugged. Common causes include Damaged DPFE hoses, EGR orifice tube damaged, Fualty DPFE. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1406 Mazda indicates DPFE Downstream Hose Off Or Plugged.
- Common causes
- Common causes include Damaged DPFE hoses, EGR orifice tube damaged, Fualty DPFE.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P1406 Mazda Description
What are the Possible Causes of the DTC P1406 Mazda?
- Damaged DPFE hoses
- EGR orifice tube damaged
- Fualty DPFE
How to Fix the DTC P1406 Mazda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1406 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1406 Mazda code?
Need more information on how to fix the P1406 Mazda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1406 Mazda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1406 Mazda Code
1. What does the OBDII code P1406 mean for a Mazda?
P1406 indicates that the DPFE (Differential Pressure Feedback EGR) sensor's downstream hose is either disconnected or clogged, affecting EGR system performance.
2. What are common symptoms of the P1406 code in a Mazda?
Typical symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the check engine light being illuminated.
3. What causes the P1406 code to appear in a Mazda?
The main causes include a disconnected or blocked DPFE downstream hose, a faulty DPFE sensor, or carbon buildup in the EGR system.
4. Can a clogged EGR system trigger the P1406 code?
Yes, excessive carbon buildup in the EGR system can restrict airflow, leading to issues with the DPFE sensor and triggering the code.
5. How do I fix the P1406 code on a Mazda?
Inspect and reconnect or replace the DPFE downstream hose if it’s disconnected or damaged, clean or replace the DPFE sensor, and check for carbon buildup in the EGR system.
6. Can driving with the P1406 code damage my Mazda?
Driving with this code for an extended period can lead to reduced engine efficiency and potential damage to the EGR system or other components.
7. How do I diagnose the P1406 code in a Mazda?
Start by inspecting the DPFE sensor hoses for damage or disconnection, check for carbon buildup in the EGR system, and test the DPFE sensor for proper function.
8. How much does it cost to repair a P1406 code on a Mazda?
Repair costs vary but typically include $50–$200 for cleaning or replacing the DPFE sensor and hoses, depending on labor rates and parts.
9. Can a faulty DPFE sensor be the sole cause of P1406?
Yes, a malfunctioning DPFE sensor can misinterpret pressure changes, leading to the P1406 code.
10. How can I prevent the P1406 code from reoccurring in my Mazda?
Regularly clean the EGR system to prevent carbon buildup, inspect hoses for wear, and replace components as needed to maintain proper EGR function.
Discuss the causes and fixes for P1406 Mazda OBDII Code
Code P1406 Mazda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
