AutoCodes – Chrysler – P1403 Chrysler

P1403 Chrysler Code - 5 volt reference voltage to EGR valve missing

Quick Answer

P1403 Chrysler indicates 5 volt reference voltage to EGR valve missing. Common causes include Faulty EGR Position Sensor, EGR Position Sensor harness is open or shorted, EGR Position Sensor circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P1403 Chrysler indicates 5 volt reference voltage to EGR valve missing.
Common causes: Common causes include Faulty EGR Position Sensor, EGR Position Sensor harness is open or shorted, EGR Position Sensor circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,961

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 19, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1403 Chrysler Description

OBDII Code P1403 Chrysler - 5 volt reference voltage to EGR valve missing - AutoCodes.com — P1403 Chrysler Code - 5 volt reference voltage to EGR valve missing

What does this mean?

What are the Possible Causes of the DTC P1403 Chrysler?

Faulty EGR Position Sensor
EGR Position Sensor harness is open or shorted
EGR Position Sensor circuit poor electrical connection

How to Fix the DTC P1403 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1403 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1403 Chrysler code?

Need more information on how to fix the P1403 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1403 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.