AutoCodesChevrolet – P1400 2016 Chevrolet Silverado

P1400 2016 Chevrolet Silverado Code - Cold Start Emission Reduction Control System

Quick Answer

The catalytic converter must be warmed to efficiently reduce emissions. Common causes include Dirty Throttle Body, Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1400 2016 Chevrolet Silverado indicates Cold Start Emission Reduction Control System.
Common causes
Common causes include Dirty Throttle Body, Dirty Air Filter, Dirty Mass Air Flow (MAF) Sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 474
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 13, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1400 2016 Chevrolet Silverado Description

The catalytic converter must be warmed to efficiently reduce emissions. The cold start strategy is to reduce the amount of time it takes to warm the catalytic converter. During a cold start, the engine idle speed is elevated, and spark timing is retarded to allow the catalyst to warm quickly. This diagnostic monitors the following to build an exhaust energy model: Engine speed, Spark advance, Throttle position, Engine airflow, Engine coolant temperature, Engine runtime, Park/neutral position, Vehicle speed. The actual model is then compared to the expected exhaust energy model. The Diagnostic Trouble Code (DTC) will set when the actual exhaust energy model does not match the expected exhaust energy model.
OBDII Code P1400 2016 Chevrolet Silverado - Cold Start Emission Reduction Control System - AutoCodes.com
P1400 2016 Chevrolet Silverado Code - Cold Start Emission Reduction Control System

What are the Possible Causes of the DTC P1400 2016 Chevrolet Silverado?

  • Dirty Throttle Body
  • Dirty Air Filter
  • Dirty Mass Air Flow (MAF) Sensor
  • Intake manifold leak
  • Exhaust leak
  • Damaged, restricted, modified or enhanced exhaust system

How to Fix the DTC P1400 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1400 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1400 2016 Chevrolet Silverado code?

Need more information on how to fix the P1400 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1400 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1400 2016 Chevrolet Silverado Code

1. What does the OBDII code P1400 mean for a 2016 Chevrolet Silverado?

The P1400 code indicates an issue with the Cold Start Emission Reduction Control System, which helps reduce emissions during engine warm-up.

2. What are the common symptoms of the P1400 code in a 2016 Chevrolet Silverado?

Symptoms may include the check engine light turning on, rough idling during a cold start, reduced fuel efficiency, or increased emissions.

3. What can cause the P1400 code in a Chevrolet Silverado?

Possible causes include a faulty cold start emission valve, damaged wiring or connectors, a malfunctioning engine control module (ECM), or clogged passages in the emission system.

4. Can I drive my 2016 Chevrolet Silverado with a P1400 code?

While the vehicle may still be drivable, it’s not recommended as the issue could lead to increased emissions, poor performance, and potential long-term damage.

5. How do I diagnose the P1400 code on my Silverado?

Diagnosing involves using an OBDII scanner to verify the code, visually inspecting wiring and connectors, and testing the cold start emission valve for proper operation.

6. What is the cold start emission reduction control system?

This system helps reduce harmful emissions during the engine’s warm-up phase by controlling airflow and the combustion process.

7. How can the P1400 code be fixed?

Repairs may include replacing the cold start emission valve, cleaning clogged passages, repairing damaged wiring, or updating the ECM with the latest software.

8. How much does it cost to fix a P1400 code on a 2016 Chevrolet Silverado?

Repair costs vary but typically range from $150 to $400, depending on whether parts like the cold start emission valve need replacement.

9. Can a dirty air filter cause the P1400 code?

While unlikely, a clogged air filter can indirectly affect engine performance, so it’s worth checking during diagnostics.

10. Will resetting the code fix the P1400 issue permanently?

Simply resetting the code may temporarily clear the check engine light, but the underlying issue must be resolved to prevent the code from returning.

Discuss the causes and fixes for P1400 2016 Chevrolet Silverado OBDII Code

Code P1400 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play