P1385 BMW Code - Knock Sensor 4 Circuit
Quick Answer
P1385 BMW indicates Knock Sensor 4 Circuit. Common causes include Faulty Knock Sensor 4, Knock Sensor 4 harness is open or shorted, Knock Sensor 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1385 BMW indicates Knock Sensor 4 Circuit.
- Common causes
- Common causes include Faulty Knock Sensor 4, Knock Sensor 4 harness is open or shorted, Knock Sensor 4 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1385 BMW Description
What are the Possible Causes of the DTC P1385 BMW?
- Faulty Knock Sensor 4
- Knock Sensor 4 harness is open or shorted
- Knock Sensor 4 circuit poor electrical connection
How to Fix the DTC P1385 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1385 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1385 BMW code?
Need more information on how to fix the P1385 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1385 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1385 BMW Code
1. What does the OBDII code P1385 mean on a BMW?
P1385 indicates a malfunction in the Knock Sensor 4 Circuit, which monitors engine vibrations to detect pre-ignition or engine knocking.
2. What are the common symptoms of the P1385 code on a BMW?
Symptoms may include poor engine performance, reduced fuel efficiency, engine knocking, illuminated check engine light, and potential hesitation during acceleration.
3. What causes the P1385 code to appear on a BMW?
Common causes include a faulty knock sensor, damaged wiring or connectors in the knock sensor circuit, an ECU issue, or excessive engine vibrations.
4. Can I drive my BMW with the P1385 code active?
Driving with this code is possible but not recommended, as engine knocking can cause long-term damage if not addressed promptly.
5. How do I diagnose the P1385 code on my BMW?
Diagnosis involves checking the knock sensor and its wiring for damage, testing the sensor with a multimeter, and inspecting the ECU for faults.
6. How do I fix the P1385 code on a BMW?
Repairs may include replacing the knock sensor, repairing damaged wiring or connectors, or reprogramming/repairing the ECU if necessary.
7. Where is Knock Sensor 4 located on a BMW?
Knock Sensor 4 is typically located on the engine block, near the cylinders it monitors, but the exact location depends on the BMW model.
8. How much does it cost to repair the P1385 code on a BMW?
Repair costs vary, but replacing a knock sensor typically ranges from $150 to $400, including parts and labor.
9. Can a faulty knock sensor cause engine damage?
Yes, a faulty knock sensor can fail to detect knocking, potentially leading to engine damage from uncontrolled combustion.
10. Will clearing the P1385 code fix the problem?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P1385 BMW OBDII Code
Code P1385 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
