P1364 Volkswagen Code - Cylinder 4 Ignition Activation Circuit Open
Quick Answer
The Engine Control Module (ECM) must determine if a misfire is occurring and identify the specific cylinder(s) and the severity of the misfire event and whether it is emissions relevant or catalyst damaging. Common causes include Faulty Ignition Coil Cylinder 4, Ignition Coil Cylinder 4 harness is open or shorted, Ignition Coil Cylinder 4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1364 Volkswagen indicates Cylinder 4 Ignition Activation Circuit Open.
- Common causes
- Common causes include Faulty Ignition Coil Cylinder 4, Ignition Coil Cylinder 4 harness is open or shorted, Ignition Coil Cylinder 4 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1364 Volkswagen Description
The misfire/engine roughness calculation is derived from the differences in the period duration (T) of individual increment gear segments. Each segment period consists of an angular range of 120° crank angle that starts 78° before the Top Dead Center (TDC).
If the expected period duration is greater than the permissible value a misfire fault for the particular cylinder is stored in the fault memory of the ECM. Depending on the level of misfire rate measured the control unit will illuminate the "Service Engine Soon" light, may cut off fuel to the particular cylinder, and may switch lambda operation to open-loop. All misfire faults are weighted to determine if the misfire is emissions relevant or catalyst damaging.
What are the Possible Causes of the DTC P1364 Volkswagen?
- Faulty Ignition Coil Cylinder 4
- Ignition Coil Cylinder 4 harness is open or shorted
- Ignition Coil Cylinder 4 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1364 Volkswagen?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1364 Volkswagen code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1364 Volkswagen code?
Need more information on how to fix the P1364 Volkswagen code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1364 Volkswagen code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1364 Volkswagen Code
No Frequently Asked Questions about P1364 Volkswagen Code found.
Discuss the causes and fixes for P1364 Volkswagen OBDII Code
Code P1364 Volkswagen comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.