AutoCodes – Chevrolet – P1363 Chevrolet

P1363 Chevrolet Code - Ignition Control Cylinder 3 Not Toggling After Enable

Quick Answer

P1363 Chevrolet indicates Ignition Control Cylinder 3 Not Toggling After Enable. Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1363 Chevrolet indicates Ignition Control Cylinder 3 Not Toggling After Enable.
Common causes: Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,485

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1363 Chevrolet Description

OBDII Code P1363 Chevrolet - Ignition Control Cylinder 3 Not Toggling After Enable - AutoCodes.com — P1363 Chevrolet Code - Ignition Control Cylinder 3 Not Toggling After Enable

What does this mean?

What are the Possible Causes of the DTC P1363 Chevrolet?

Faulty Ignition Coil
Ignition Coil harness is open or shorted
Ignition Coil circuit poor electrical connection

How to Fix the DTC P1363 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1363 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1363 Chevrolet code?

Need more information on how to fix the P1363 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1363 Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1363 Chevrolet Code

1. What are the common symptoms of OBDII code P1363 in a Chevrolet related to Ignition Control Cylinder 3?

The common symptoms include rough idling, misfiring, engine stalling, and a noticeable decrease in engine performance.

2. What are the typical causes of the P1363 code indicating Ignition Control Cylinder 3 not toggling after enable in a Chevrolet?

Possible causes include a faulty ignition coil, damaged spark plugs, a malfunctioning ignition control module, or issues with the wiring or connectors in the ignition system.

3. How can I diagnose the P1363 code on a Chevrolet related to Ignition Control Cylinder 3?

To diagnose the issue, you can perform a visual inspection of the ignition system components, check the spark plugs and ignition coil for proper functioning, and use an OBDII scanner to identify the specific cylinder affected.

4. Can driving with OBDII code P1363 in a Chevrolet be harmful to the vehicle?

Continuing to drive with this code may lead to further engine damage, reduced fuel efficiency, and potential catalytic converter issues. It is recommended to address the issue promptly.

5. What are some repair tips for resolving the P1363 code in a Chevrolet indicating Ignition Control Cylinder 3 not toggling after enable?

Repair tips include replacing the faulty ignition coil, inspecting and replacing damaged spark plugs, testing and potentially replacing the ignition control module, and ensuring all wiring connections are secure.

6. Is it possible to reset the OBDII code P1363 in a Chevrolet without fixing the underlying issue?

While you can clear the code with an OBDII scanner, it is crucial to address the root cause of the problem to prevent it from reoccurring and potentially causing more significant issues in the future.

7. Are there any specific maintenance practices that can help prevent the P1363 code related to Ignition Control Cylinder 3 in a Chevrolet?

Regularly inspecting and replacing spark plugs, ensuring proper ignition system maintenance, and using high-quality fuel can help prevent issues that may trigger the P1363 code.

8. Can a DIY enthusiast with basic automotive knowledge fix the P1363 code in a Chevrolet at home?

Depending on the exact cause of the code, DIY enthusiasts with basic automotive knowledge may be able to address the issue by following repair guides or consulting with a mechanic for guidance.

9. How long can I safely drive my Chevrolet with the P1363 code before getting it repaired?

It is recommended not to drive the vehicle for an extended period with the P1363 code present, as prolonged driving can lead to more severe engine problems and potentially higher repair costs.

10. Will fixing the OBDII code P1363 in a Chevrolet related to Ignition Control Cylinder 3 improve the overall performance of the vehicle?

Yes, resolving the P1363 code and fixing the underlying issue will likely restore the engine's performance, improve fuel efficiency, and prevent further damage to the vehicle's components.