AutoCodes – Jaguar – P1362 Jaguar

P1362 Jaguar Code - Ignition Coil Cylinder 2 No Activation

Quick Answer

P1362 Jaguar indicates Ignition Coil Cylinder 2 No Activation. Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1362 Jaguar indicates Ignition Coil Cylinder 2 No Activation.
Common causes: Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,826

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1362 Jaguar Description

OBDII Code P1362 Jaguar - Ignition Coil Cylinder 2 No Activation - AutoCodes.com — P1362 Jaguar Code - Ignition Coil Cylinder 2 No Activation

What does this mean?

What are the Possible Causes of the DTC P1362 Jaguar?

Faulty Ignition Coil
Ignition Coil harness is open or shorted
Ignition Coil circuit poor electrical connection

How to Fix the DTC P1362 Jaguar?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1362 Jaguar code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1362 Jaguar code?

Need more information on how to fix the P1362 Jaguar code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1362 Jaguar code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1362 Jaguar Code

1. What are the common symptoms of OBDII code P1362 in a Jaguar related to the Ignition Coil Cylinder 2 No Activation?

- Common symptoms include engine misfires, rough idling, loss of power, and illuminated Check Engine Light.

2. What could be the possible causes of OBDII code P1362 in a Jaguar indicating Ignition Coil Cylinder 2 No Activation?

- Potential causes may include a faulty ignition coil, wiring issues, a defective spark plug, or problems with the engine control module (ECM).

3. How can I diagnose the issue related to OBDII code P1362 in a Jaguar for Ignition Coil Cylinder 2 No Activation?

- Diagnose by checking the ignition coil for proper voltage, inspecting the wiring for any damage, testing the spark plug, and scanning the ECM for related error codes.

4. Can driving with OBDII code P1362 indicating Ignition Coil Cylinder 2 No Activation cause further damage to the vehicle?

- Driving with this issue can potentially lead to permanent damage to the catalytic converter, increased fuel consumption, and further engine problems.

5. What is the recommended repair for OBDII code P1362 in a Jaguar showing Ignition Coil Cylinder 2 No Activation?

- The recommended repair involves replacing the faulty ignition coil, repairing any damaged wiring, checking and replacing the spark plug if necessary, and clearing the error code.

6. How can I prevent OBDII code P1362 related to Ignition Coil Cylinder 2 No Activation in my Jaguar?

- Regular maintenance, such as timely spark plug replacement, checking the ignition system, and addressing any warning signs promptly, can help prevent this issue.

7. Are there any DIY tips for addressing OBDII code P1362 in a Jaguar concerning Ignition Coil Cylinder 2 No Activation?

- DIY tips include checking and cleaning the connections to the ignition coil, inspecting the wiring for any visible damage, and ensuring proper grounding.

8. Can a professional mechanic help with diagnosing and repairing OBDII code P1362 for Ignition Coil Cylinder 2 No Activation in a Jaguar?

- Yes, a professional mechanic with experience in Jaguar vehicles can accurately diagnose the issue using specialized tools and perform the necessary repairs efficiently.

9. Is it necessary to clear the error code after repairing OBDII code P1362 related to Ignition Coil Cylinder 2 No Activation in a Jaguar?

- Yes, it is crucial to clear the error code using an OBDII scanner after completing the repairs to reset the Check Engine Light and ensure the issue has been resolved.

10. How long does it typically take to repair OBDII code P1362 in a Jaguar indicating Ignition Coil Cylinder 2 No Activation?

- The repair time can vary depending on the exact cause of the issue, but it usually takes a professional mechanic 1-2 hours to diagnose and repair the problem.