AutoCodes – Chevrolet – P1360 Chevrolet

P1360 Chevrolet Code - Ignition Control Circuit Group 2

Quick Answer

P1360 Chevrolet indicates Ignition Control Circuit Group 2. Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1360 Chevrolet indicates Ignition Control Circuit Group 2.
Common causes: Common causes include Faulty Ignition Coil, Ignition Coil harness is open or shorted, Ignition Coil circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,745

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 17, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1360 Chevrolet Description

OBDII Code P1360 Chevrolet - Ignition Control Circuit Group 2 - AutoCodes.com — P1360 Chevrolet Code - Ignition Control Circuit Group 2

What does this mean?

What are the Possible Causes of the DTC P1360 Chevrolet?

Faulty Ignition Coil
Ignition Coil harness is open or shorted
Ignition Coil circuit poor electrical connection

How to Fix the DTC P1360 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1360 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1360 Chevrolet code?

Need more information on how to fix the P1360 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1360 Chevrolet code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1360 Chevrolet Code

1. What are the common symptoms of OBDII code P1360 in a Chevrolet related to the Ignition Control Circuit Group 2?

- Common symptoms include engine misfires, rough idling, reduced engine performance, and potential stalling.

2. What are some possible causes of OBDII code P1360 in a Chevrolet indicating an issue with Ignition Control Circuit Group 2?

- Possible causes include faulty ignition coil, damaged wiring or connectors in the ignition circuit, or a malfunctioning ignition control module.

3. How can I diagnose OBDII code P1360 in a Chevrolet related to Ignition Control Circuit Group 2?

- Diagnosis involves using a scan tool to read the code, checking the ignition components for proper function, and inspecting the wiring for any signs of damage.

4. Can a DIY enthusiast repair OBDII code P1360 in a Chevrolet caused by issues in the Ignition Control Circuit Group 2?

- While some simple repairs like replacing a faulty ignition coil can be done by DIY enthusiasts, complex electrical diagnostics and repairs may require professional assistance.

5. Are there any specific repair tips for fixing OBDII code P1360 in a Chevrolet associated with Ignition Control Circuit Group 2?

- It is recommended to follow the manufacturer's diagnostic and repair procedures meticulously, use high-quality replacement parts, and ensure proper electrical connections during repairs.

6. How critical is it to address OBDII code P1360 in a Chevrolet related to the Ignition Control Circuit Group 2 promptly?

- It is important to address this code promptly to prevent further engine damage, poor fuel efficiency, and potential safety hazards due to erratic engine performance.

7. Can resetting the OBDII system clear OBDII code P1360 in a Chevrolet caused by Ignition Control Circuit Group 2 issues?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear after driving the vehicle.

8. Is it safe to continue driving a Chevrolet with OBDII code P1360 indicating problems in the Ignition Control Circuit Group 2?

- It is not recommended to drive the vehicle extensively with this code present, as it can lead to poor engine performance, potential stalling, and other drivability issues.

9. How can a professional mechanic further diagnose OBDII code P1360 in a Chevrolet linked to Ignition Control Circuit Group 2?

- A professional mechanic may perform advanced electrical tests, inspect the ignition system components thoroughly, and use specialized diagnostic equipment to pinpoint the exact cause of the issue.

10. Are there any common mistakes to avoid when troubleshooting OBDII code P1360 in a Chevrolet related to Ignition Control Circuit Group 2?

- Common mistakes include overlooking simple issues like loose connections, ignoring related codes or symptoms, and not following a systematic diagnostic approach when troubleshooting.