P1359 Code - Crankshaft Position / Top Dead Center Sensor Circuit Malfunction
Quick Answer
The Engine Control Module (ECM) monitors the Crankshaft Position / Top Dead Center Sensor. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1359 indicates Crankshaft Position / Top Dead Center Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1359 Description
What are the Possible Causes of the DTC P1359?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1359?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1359 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1359 code?
Need more information on how to fix the P1359 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1359 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1359 Acura — Crankshaft Position / Top Dead Center Sensor Circuit Malfunction
- P1359 Audi — Ignition Circuit Cylinder 2 Short to B+
- P1359 BMW — Misfire Cylinder 9 With Fuel Cut-Off
- P1359 Buick — Ignition Control Circuit Group 1
- P1359 Cadillac — Ignition Control Circuit Group 1
- P1359 Chevrolet — Ignition Control Circuit Group 1
- P1359 Ford — Spark Output Circuit Fault
- P1359 GMC — Ignition Control Circuit Group 1
- P1359 Honda — Crankshaft Position / Top Dead Center Sensor Circuit Malfunction
- P1359 Isuzu — Crankshaft Position / Top Dead Center Sensor Circuit Malfunction
- P1359 Lincoln — Spark Output Circuit Fault
- P1359 Mercury — Spark Output Circuit Fault
- P1359 Volkswagen — Ignition Circuit Cylinder 2 Short to B+
Frequently Asked Questions about P1359 Code
1. What are the common symptoms of OBDII code P1359 (Crankshaft Position / Top Dead Center Sensor Circuit Malfunction)?
- Common symptoms include rough idling, engine misfires, difficulty starting the vehicle, and a decrease in overall engine performance.
2. What are the possible causes of OBDII code P1359?
- The code can be triggered by a faulty crankshaft position sensor, wiring issues in the sensor circuit, a failed top dead center (TDC) sensor, or a problem with the engine control module (ECM).
3. How can I diagnose the cause of OBDII code P1359?
- Diagnosis typically involves checking the crankshaft position sensor, TDC sensor, and related wiring for any signs of damage or malfunction. Using a scan tool to read live data can also help pinpoint the issue.
4. Can I still drive my vehicle with OBDII code P1359?
- It is not recommended to drive your vehicle with this code present, as it can lead to further damage to the engine and potentially cause safety hazards.
5. How can I repair OBDII code P1359?
- Repairing the code usually involves replacing the faulty crankshaft position sensor, TDC sensor, or repairing any damaged wiring in the sensor circuit. In some cases, reprogramming the ECM may be necessary.
6. Are there any DIY tips for fixing OBDII code P1359?
- While some basic troubleshooting like checking the sensor connections and wiring can be done by DIY enthusiasts, it is recommended to have a professional mechanic diagnose and repair this code to ensure proper fix.
7. Will resetting the OBDII code P1359 make it go away permanently?
- Resetting the code may temporarily clear it, but if the underlying issue is not resolved, the code is likely to reappear once the vehicle is driven again.
8. How much does it typically cost to repair OBDII code P1359?
- The cost of repairing this code can vary depending on the specific cause of the issue, but it may range from $100 to $500, including parts and labor.
9. Can a bad crankshaft position sensor cause OBDII code P1359?
- Yes, a faulty crankshaft position sensor is a common cause of triggering OBDII code P1359 due to its critical role in detecting the position of the crankshaft in relation to the TDC.
10. Is it safe to ignore OBDII code P1359 if my vehicle is still running normally?
- Ignoring the code is not recommended, as it can lead to potential engine performance issues and even result in stalling or difficulty starting the vehicle in the future.
Discuss the causes and fixes for P1359 OBDII Code
Code P1359 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
