AutoCodes – Toyota – P1349 2001 Toyota Echo

P1349 2001 Toyota Echo Code - Variable Valve Timing System Malfunction Bank 1

Quick Answer

Variable Valve Timing (VVT) system controls the intake valve timing to proper timing in response to driving condition. Common causes include Dirty or low engine oil, Valve timing, Oil control valve. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1349 2001 Toyota Echo indicates Variable Valve Timing System Malfunction Bank 1.
Common causes
Common causes include Dirty or low engine oil, Valve timing, Oil control valve.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 20,346
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 17, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1349 2001 Toyota Echo Description

Variable Valve Timing (VVT) system controls the intake valve timing to proper timing in response to driving condition. The Engine Control Module (ECM) controls Oil Control Valve (OCV) to make the intake valve timing properly, and, oil pressure controlled with OCV is supplied to the VVT controller, and then, VVT controller changes relative position between the camshaft and the crankshaft.
OBDII Code P1349 2001 Toyota Echo - Variable Valve Timing System Malfunction Bank 1 - AutoCodes.com
P1349 2001 Toyota Echo Code - Variable Valve Timing System Malfunction Bank 1

What are the Possible Causes of the DTC P1349 2001 Toyota Echo?

  • Dirty or low engine oil
  • Valve timing
  • Oil control valve
  • Variable Valve Timing controller assembly
  • Engine Control Module (ECM)

How to Fix the DTC P1349 2001 Toyota Echo?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1349 2001 Toyota Echo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1349 2001 Toyota Echo code?

Need more information on how to fix the P1349 2001 Toyota Echo code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1349 2001 Toyota Echo code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1349 2001 Toyota Echo Code

1. What does the OBDII code P1349 indicate on a 2001 Toyota Echo?

The code P1349 indicates a malfunction in the Variable Valve Timing (VVT) system on Bank 1. This typically means there is an issue with the control or operation of the VVT system, which could affect the engine's timing and performance.

2. What are common symptoms of code P1349 in a 2001 Toyota Echo?

Symptoms can include a rough idle, loss of power, decreased fuel efficiency, and an illuminated check engine light. In some cases, the engine might also exhibit knocking noises or stall.

3. What can cause the P1349 code to appear on a 2001 Toyota Echo?

Possible causes include a faulty VVT solenoid, dirty or low engine oil levels, a clogged VVT valve, or timing chain issues. Electrical problems with the wiring or connectors related to the VVT circuit can also trigger this code.

4. How can I fix the P1349 code on a 2001 Toyota Echo?

To fix this issue, start by checking the engine oil level and quality; replace if dirty or low. Inspect the VVT solenoid and its wiring for any damage or loose connections. If the solenoid is faulty, replacing it may resolve the problem. Additionally, ensure the timing chain and other related components are in good condition.

5. Is it safe to drive a 2001 Toyota Echo with the P1349 code?

Driving with the P1349 code can be risky as it may lead to engine performance issues or further damage. It's advisable to diagnose and fix the problem promptly to avoid potential engine damage.

6. How do I diagnose the VVT system to confirm the cause of the P1349 code in a 2001 Toyota Echo?

Start by scanning the engine with an OBDII scanner to confirm the code. Check the engine oil, and inspect the VVT solenoid for proper operation. You may also need to check the electrical connections and wiring to the VVT solenoid. A professional mechanic can help perform a detailed diagnosis using specialized tools.

7. What tools are needed to resolve the P1349 code on a 2001 Toyota Echo?

You'll need an OBDII scanner to read the code and monitor live data. Basic hand tools may be necessary to access and replace the VVT solenoid or related components. A multimeter is useful for checking electrical connections.

8. Can a faulty VVT solenoid lead to other engine problems in a 2001 Toyota Echo?

Yes, a faulty VVT solenoid can affect the engine's timing, potentially causing rough idling, reduced power output, and increased emissions. Over time, this can lead to more severe damage such as engine knocking or failure if not addressed.

9. How often do VVT system malfunctions like P1349 occur in a 2001 Toyota Echo?

VVT system issues are not uncommon, especially in older vehicles or those with high mileage that have not had regular maintenance. Regular oil changes and inspections can help prevent such issues.

Discuss the causes and fixes for P1349 2001 Toyota Echo OBDII Code

  • not yet but other codes are p0300,301,302,303,304,symptoms are high revs and stalling at lights

  • I suspect you may have a problem with Variable Valve Timing system. The Oil Control Valve (OCV) could be clogged. How the engine oil level and condition? When was the last time you change the engine oil? You could start by changing the engine oil and cleaning the Oil Control Valve.

  • I have the same problem. I've changed the engine oil, filter etc and cleaned the oil control valve. Still high reving and once in a while will stall. What can be done next?

  • At this point you may have to replace the valve to fix the problem.

  • try to clean out the throttle body

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play