P1346 Hyundai Code - #6 Ion Line Open
Quick Answer
P1346 Hyundai indicates #6 Ion Line Open. Common causes for P1346 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1346 Hyundai indicates #6 Ion Line Open.
- Common causes
- Common causes for P1346 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1346 Hyundai Description
How to Fix the DTC P1346 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1346 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1346 Hyundai code?
Need more information on how to fix the P1346 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1346 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1346 Hyundai Code
1. What does the OBDII code P1346 mean on a Hyundai?
P1346 on a Hyundai indicates an issue titled "#6 Ion Line Open," which typically refers to a problem with the ion sensing circuit for cylinder 6.
2. What are the common symptoms of code P1346 in a Hyundai?
Symptoms may include rough idling, misfires, reduced engine performance, poor fuel economy, and the Check Engine Light being illuminated.
3. What causes the P1346 code to appear in a Hyundai?
The code is often caused by a faulty ignition coil, damaged wiring or connectors in the ion sensing circuit, or a malfunction in the Engine Control Module (ECM).
4. Can a bad spark plug cause the P1346 code on a Hyundai?
Yes, a damaged or worn spark plug in cylinder 6 can disrupt the ion sensing circuit and trigger the P1346 code.
5. How do I diagnose the P1346 code on a Hyundai?
Start by inspecting the ignition coil, spark plug, and wiring for cylinder 6. Use a multimeter to check for continuity in the ion sensing circuit and scan for additional codes.
6. Is it safe to drive my Hyundai with the P1346 code?
While the car may still be drivable, ignoring the code can lead to engine misfires, reduced performance, and potential damage to the catalytic converter.
7. How is the P1346 code fixed on a Hyundai?
Repairs may involve replacing the ignition coil or spark plug, repairing or replacing damaged wiring, or reprogramming/updating the ECM.
8. How much does it cost to fix the P1346 code on a Hyundai?
The repair cost varies but typically ranges from $150 to $400, depending on whether parts like the ignition coil or spark plug need replacement.
9. Can a dead battery cause the P1346 code on a Hyundai?
A dead or weak battery is unlikely to directly cause the P1346 code but can contribute to electrical issues that may affect the ion sensing circuit.
10. Will clearing the P1346 code resolve the issue on my Hyundai?
Clearing the code will turn off the Check Engine Light temporarily, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P1346 Hyundai OBDII Code
Code P1346 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
