P1345 Hyundai Code - #5 ION Line Open
Quick Answer
P1345 Hyundai indicates #5 ION Line Open. Common causes for P1345 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1345 Hyundai indicates #5 ION Line Open.
- Common causes
- Common causes for P1345 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1345 Hyundai Description
How to Fix the DTC P1345 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1345 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1345 Hyundai code?
Need more information on how to fix the P1345 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1345 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1345 Hyundai Code
1. What does the OBDII code P1345 mean on a Hyundai?
P1345 on a Hyundai indicates "ION Line Open," which typically refers to a fault in the ion sensing circuit of the ignition system.
2. What are common symptoms of the P1345 code in a Hyundai?
Common symptoms include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and an illuminated check engine light.
3. What causes the P1345 code to be triggered on a Hyundai?
The code can be caused by a damaged ion sensing module, faulty ignition coils, wiring issues in the ion sensing circuit, or a malfunctioning ECM (Engine Control Module).
4. Can a loose or damaged spark plug cause the P1345 code on a Hyundai?
Yes, a loose or damaged spark plug can disrupt the ion sensing process and potentially trigger the P1345 code.
5. How can I diagnose the P1345 code on a Hyundai?
Diagnosis involves checking the ion sensing circuit for open or shorted wires, inspecting ignition coils and spark plugs, and testing the ion sensing module for proper function.
6. Can I drive my Hyundai with the P1345 code active?
Driving with the P1345 code is not recommended, as it may lead to worsening engine performance or damage to the ignition system over time.
7. How do I fix the P1345 code on a Hyundai?
Repairs may include replacing faulty ignition coils, repairing or replacing damaged wiring, replacing spark plugs, or addressing issues with the ion sensing module.
8. Is the P1345 code specific to certain Hyundai models?
The P1345 code can appear on various Hyundai models, but it is most commonly associated with vehicles equipped with ion sensing ignition systems.
9. Will clearing the P1345 code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be addressed to prevent the code from returning.
10. How much does it typically cost to repair the P1345 code on a Hyundai?
Repair costs can vary widely depending on the root cause, ranging from $50 for a spark plug replacement to over $500 if the ion sensing module or wiring requires replacement.
Discuss the causes and fixes for P1345 Hyundai OBDII Code
Code P1345 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
