P1339 Audi Code - Crankshaft Position/Engine Speed Sensor Cross Connected
Quick Answer
P1339 Audi indicates Crankshaft Position/Engine Speed Sensor Cross Connected. Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1339 Audi indicates Crankshaft Position/Engine Speed Sensor Cross Connected.
- Common causes
- Common causes include Faulty Camshaft Position Sensor, Camshaft Position Sensor harness is open or shorted, Camshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1339 Audi Description
What are the Possible Causes of the DTC P1339 Audi?
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1339 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1339 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1339 Audi code?
Need more information on how to fix the P1339 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1339 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1339 Audi Code
What does the OBDII code P1339 mean for an Audi?
P1339 indicates a problem with the Crankshaft Position/Engine Speed Sensor, often related to cross-connected or incorrect wiring.
What are the common symptoms of code P1339 on an Audi?
Symptoms may include engine misfires, poor acceleration, difficulty starting, stalling, or a check engine light.
What causes the P1339 code to appear?
Common causes include faulty crankshaft position sensor, damaged wiring, incorrect sensor installation, or issues with the engine control module (ECM).
Can a faulty crankshaft position sensor trigger code P1339?
Yes, a malfunctioning or misaligned crankshaft position sensor is a primary cause of this code.
How can I diagnose code P1339 on my Audi?
Start by scanning for codes, inspecting the crankshaft position sensor, checking wiring connections, and testing the sensor for proper voltage and resistance.
Is code P1339 serious?
Yes, it can lead to drivability issues and potential engine damage if ignored, so timely diagnosis and repair are recommended.
Can I drive my Audi with code P1339?
Driving with this code is not recommended, as it can cause engine performance issues and may lead to more severe damage.
How do I fix code P1339 on an Audi?
Repair may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring, or reprogramming the ECM if needed.
How much does it cost to repair code P1339?
Repair costs vary but typically range from $150 to $400, depending on whether the sensor or wiring needs to be replaced.
Can a loose connector cause code P1339?
Yes, a loose or corroded connector at the crankshaft position sensor can trigger this code. Ensure all connections are secure and clean.
Discuss the causes and fixes for P1339 Audi OBDII Code
Code P1339 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
