AutoCodes – Chevrolet – P1338 2014 Chevrolet Silverado

P1338 2014 Chevrolet Silverado Code - Cylinder 1 Glow Plug Offset Exceeded Learning Limit

Quick Answer

The Glow Plug Control Module has not learned the glow plug offset values. Common causes include Perform Glow Plug Learn procedure, Faulty Glow Plug 1, Glow Plug 1 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1338 2014 Chevrolet Silverado indicates Cylinder 1 Glow Plug Offset Exceeded Learning Limit.
Common causes
Common causes include Perform Glow Plug Learn procedure, Faulty Glow Plug 1, Glow Plug 1 harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 332
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 30, 2022
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1338 2014 Chevrolet Silverado Description

The Glow Plug Control Module has not learned the glow plug offset values. If a glow plug has been replaced and the glow plug learn was not performed, or if the Glow Plug Control Module experiences an Electronically Erasable Programmable Read Only Memory (EEPROM) error or data corruption, this Diagnostic Trouble Code (DTC) to set. The DTC will be set if the glow plug hot resistance is outside a predefined threshold.
OBDII Code P1338 2014 Chevrolet Silverado - Cylinder 1 Glow Plug Offset Exceeded Learning Limit - AutoCodes.com
P1338 2014 Chevrolet Silverado Code - Cylinder 1 Glow Plug Offset Exceeded Learning Limit

What are the Possible Causes of the DTC P1338 2014 Chevrolet Silverado?

  • Perform Glow Plug Learn procedure
  • Faulty Glow Plug 1
  • Glow Plug 1 harness is open or shorted
  • Glow Plug 1 circuit poor electrical connection

How to Fix the DTC P1338 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1338 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1338 2014 Chevrolet Silverado code?

Need more information on how to fix the P1338 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1338 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1338 2014 Chevrolet Silverado Code

1. What does OBDII code P1338 mean on a 2014 Chevrolet Silverado?

P1338 indicates that the Cylinder 1 Glow Plug Offset has exceeded the learning limit, which may affect the engine's ability to start and operate efficiently, especially in cold conditions.

2. What are common symptoms of code P1338 on a 2014 Chevrolet Silverado?

Symptoms may include difficulty starting the engine in cold weather, rough idling, reduced fuel efficiency, and the check engine light being illuminated.

3. What causes code P1338 on a 2014 Chevrolet Silverado?

Common causes include a faulty glow plug, damaged wiring or connectors, an issue with the glow plug control module, or carbon build-up around the glow plug.

4. Can a faulty glow plug trigger code P1338?

Yes, a faulty or worn-out glow plug can cause the offset to exceed the learning limit, leading to this code.

5. How can I diagnose code P1338 on my 2014 Chevrolet Silverado?

Start by checking the glow plug for Cylinder 1, inspecting the wiring and connectors, and testing the glow plug control module for proper operation.

6. Is it safe to drive with code P1338 on a 2014 Chevrolet Silverado?

While the vehicle may still run, prolonged driving with this code can lead to harder starts in cold weather and potential damage to the engine's combustion system.

7. How do I fix code P1338 on a 2014 Chevrolet Silverado?

Repairs may involve replacing the Cylinder 1 glow plug, cleaning carbon deposits, repairing damaged wiring, or replacing the glow plug control module if it's faulty.

8. Can carbon build-up cause code P1338 on a 2014 Chevrolet Silverado?

Yes, excessive carbon deposits around the glow plug can interfere with its operation and trigger this code.

9. How much does it cost to repair code P1338 on a 2014 Chevrolet Silverado?

Repair costs vary but typically range from $100 to $300 depending on whether the glow plug, wiring, or control module needs replacement.

10. Will clearing the code P1338 fix the issue on a 2014 Chevrolet Silverado?

Clearing the code will remove it temporarily, but the underlying problem must be addressed to prevent the code from returning.

Discuss the causes and fixes for P1338 2014 Chevrolet Silverado OBDII Code

Code P1338 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play