AutoCodes – Honda – P1337 2000 Honda Civic

P1337 2000 Honda Civic Code - Crankshaft Position Sensor No Signal

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1337 2000 Honda Civic indicates Crankshaft Position Sensor No Signal.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,104

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1337 2000 Honda Civic Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P1337 2000 Honda Civic - Crankshaft Position Sensor No Signal - AutoCodes.com — P1337 2000 Honda Civic Code - Crankshaft Position Sensor No Signal

What does this mean?

What are the Possible Causes of the DTC P1337 2000 Honda Civic?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P1337 2000 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1337 2000 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1337 2000 Honda Civic code?

Need more information on how to fix the P1337 2000 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1337 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1337 2000 Honda Civic Code

1. What does OBDII code P1337 on a 2000 Honda Civic mean?

- This code indicates a problem with the crankshaft position sensor, specifically a no signal issue.

2. What are the common symptoms of a P1337 code in a 2000 Honda Civic?

- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.

3. What are the possible causes of a P1337 code on a 2000 Honda Civic?

- The main causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's alignment.

4. How can I diagnose a P1337 code on my 2000 Honda Civic?

- Diagnosing this code involves checking the crankshaft position sensor for proper operation, inspecting the sensor's wiring and connectors, and ensuring the sensor is correctly aligned.

5. How can I repair a P1337 code on a 2000 Honda Civic?

- Repairing this code typically involves replacing the faulty crankshaft position sensor, repairing any damaged wiring or connectors, and adjusting the sensor's alignment if necessary.

6. Can a P1337 code cause further damage to my 2000 Honda Civic if left unaddressed?

- Ignoring a P1337 code can lead to more severe engine issues over time, such as increased engine wear, poor performance, and potential engine failure.

7. Are there any DIY tips for addressing a P1337 code on a 2000 Honda Civic?

- While some may attempt to replace the crankshaft position sensor themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair to ensure the issue is resolved correctly.

8. How much does it typically cost to repair a P1337 code on a 2000 Honda Civic?

- The cost of repairing a P1337 code can vary depending on the extent of the issue, but it may range from $100 to $300 for parts and labor.

9. Will resetting the OBDII code clear the P1337 code on a 2000 Honda Civic?

- Resetting the OBDII code may temporarily clear the code, but if the underlying issue with the crankshaft position sensor is not addressed, the code is likely to reappear.

10. Can a P1337 code on a 2000 Honda Civic be triggered by other factors besides a faulty crankshaft position sensor?

- While rare, other factors such as timing belt issues, engine mechanical problems, or ECU malfunctions could potentially trigger a P1337 code, so a thorough diagnosis is recommended.