AutoCodes – Honda – P1337 1999 Honda Civic

P1337 1999 Honda Civic Code - Crankshaft Position Sensor No Signal

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1337 1999 Honda Civic indicates Crankshaft Position Sensor No Signal.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,828

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1337 1999 Honda Civic Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P1337 1999 Honda Civic - Crankshaft Position Sensor No Signal - AutoCodes.com — P1337 1999 Honda Civic Code - Crankshaft Position Sensor No Signal

What does this mean?

What are the Possible Causes of the DTC P1337 1999 Honda Civic?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P1337 1999 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1337 1999 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1337 1999 Honda Civic code?

Need more information on how to fix the P1337 1999 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1337 1999 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1337 1999 Honda Civic Code

1. What does OBDII code P1337 for a 1999 Honda Civic mean?

The code P1337 indicates a no signal error from the crankshaft position sensor in the engine.

2. What are common symptoms of a P1337 code in a 1999 Honda Civic?

Common symptoms include engine misfires, rough idling, stalling, and difficulty starting the vehicle.

3. What are possible causes of a P1337 code in a 1999 Honda Civic?

Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors related to the sensor, or a failed engine control module (ECM).

4. How can I diagnose the cause of a P1337 code in my 1999 Honda Civic?

Diagnosis typically involves checking the crankshaft position sensor for proper operation, inspecting its wiring and connectors for damage, and using a scan tool to monitor sensor data.

5. Can a faulty crankshaft position sensor be repaired, or does it need to be replaced?

In most cases, a faulty crankshaft position sensor will need to be replaced with a new one to resolve the P1337 code and related issues.

6. Are there any DIY repair tips for fixing a P1337 code in a 1999 Honda Civic?

DIYers can attempt to replace the crankshaft position sensor themselves if they have the necessary tools and mechanical skills. However, it's recommended to consult a professional mechanic for accurate diagnosis and repair.

7. Is it safe to continue driving with a P1337 code present in a 1999 Honda Civic?

Continuing to drive with a P1337 code may lead to further engine damage or potential safety hazards, so it's best to address the issue promptly.

8. How much does it typically cost to repair a P1337 code in a 1999 Honda Civic?

The cost of repair can vary depending on the cause of the issue, but replacing a crankshaft position sensor in a 1999 Honda Civic can range from $100 to $300 including parts and labor.

9. Can a P1337 code be triggered intermittently in a 1999 Honda Civic?

Yes, a P1337 code can sometimes be triggered intermittently, especially if the issue is related to loose wiring or a sporadically failing sensor.

10. Will resetting the OBDII system clear a P1337 code in a 1999 Honda Civic?

Resetting the OBDII system may temporarily clear the code, but if the underlying issue with the crankshaft position sensor is not fixed, the code is likely to reappear.