P1337 1998 Honda Civic Code - Crankshaft Position Sensor No Signal
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1337 1998 Honda Civic indicates Crankshaft Position Sensor No Signal.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1337 1998 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P1337 1998 Honda Civic?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1337 1998 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1337 1998 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1337 1998 Honda Civic code?
Need more information on how to fix the P1337 1998 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1337 1998 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1337 1998 Honda Civic Code
1. What are the common symptoms of OBDII code P1337 in a 1998 Honda Civic?
- Common symptoms include engine misfires, rough idling, difficulty starting the vehicle, and a noticeable decrease in engine performance.
2. What does the OBDII code P1337 in a 1998 Honda Civic indicate?
- The code P1337 indicates a problem with the crankshaft position sensor, specifically the absence of a signal from the sensor to the engine control module.
3. What are the possible causes of OBDII code P1337 in a 1998 Honda Civic?
- The possible causes include a faulty crankshaft position sensor, wiring issues, sensor alignment problems, or a malfunctioning engine control module.
4. How can I diagnose the cause of OBDII code P1337 in my 1998 Honda Civic?
- You can diagnose the issue by checking the wiring connections to the crankshaft position sensor, testing the sensor's functionality, and inspecting the sensor's alignment with the crankshaft.
5. Can I continue driving my 1998 Honda Civic with OBDII code P1337?
- It is not recommended to continue driving with code P1337 present, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
6. Is it possible to repair OBDII code P1337 in a 1998 Honda Civic by myself?
- Depending on your automotive repair skills, you may be able to address the issue yourself by replacing the crankshaft position sensor or fixing wiring connections. However, professional assistance is recommended for accurate diagnosis and repair.
7. How much does it typically cost to repair OBDII code P1337 in a 1998 Honda Civic?
- The cost of repairing code P1337 can vary depending on the exact cause of the issue. On average, replacing a faulty crankshaft position sensor can range from $100 to $300, including parts and labor.
8. Can a faulty crankshaft position sensor cause other OBDII codes to appear in a 1998 Honda Civic?
- Yes, a faulty crankshaft position sensor can cause related codes to appear, such as P1336 (Crankshaft Position Sensor Range/Performance) or P1338 (Crankshaft Position Sensor No Signal).
9. Are there any preventive measures to avoid OBDII code P1337 in a 1998 Honda Civic?
- Regular maintenance of the crankshaft position sensor, checking wiring connections, and addressing any engine performance issues promptly can help prevent code P1337 from occurring.
10. How long does it take to repair OBDII code P1337 in a 1998 Honda Civic?
- The repair time for code P1337 can vary depending on the exact cause of the issue and the availability of parts. On average, it may take a few hours to a full day to diagnose and repair the problem.
Discuss the causes and fixes for P1337 1998 Honda Civic OBDII Code
Code P1337 1998 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
