AutoCodes – Jaguar – P1336 Jaguar

P1336 Jaguar Code - Crankshaft Position System Variation Not Learned

Quick Answer

The Crankshaft Position (CKP) sensor sends pulses to the Powertrain Control Module (PCM) as the reluctor wheel teeth rotate past the CKP sensor. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1336 Jaguar indicates Crankshaft Position System Variation Not Learned.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,224

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 10, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1336 Jaguar Description

The Crankshaft Position (CKP) sensor sends pulses to the Powertrain Control Module (PCM) as the reluctor wheel teeth rotate past the CKP sensor. The PCM uses the CKP pulses to synchronize the ignition and fuel injector operation, and to time the interval between each CKP pulse. The PCM determines when an excessive change in crankshaft speed occurs by comparing each new time interval with the previous interval. A misfire causes an unexpected change in the crankshaft speed. A certain amount of acceleration/deceleration is expected between each firing stroke, but if the crankshaft speed changes more than an expected amount, the PCM interprets this as a misfire. The interval between CKP sensor pulses is extremely small.

OBDII Code P1336 Jaguar - Crankshaft Position System Variation Not Learned - AutoCodes.com — P1336 Jaguar Code - Crankshaft Position System Variation Not Learned

What does this mean?

What are the Possible Causes of the DTC P1336 Jaguar?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection
Signal plate may be damage

How to Fix the DTC P1336 Jaguar?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1336 Jaguar code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1336 Jaguar code?

Need more information on how to fix the P1336 Jaguar code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1336 Jaguar code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1336 Jaguar Code

What does OBDII code P1336 mean for a Jaguar?

OBDII code P1336 indicates that the Engine Control Module (ECM) has detected a variation in the crankshaft position that has not been learned or calibrated properly.

What symptoms might indicate a P1336 code?

Common symptoms include rough idling, poor acceleration, engine stalling, decreased fuel efficiency, and the check engine light being illuminated.

What could cause the P1336 code to trigger?

Possible causes include a faulty crankshaft position sensor, issues with the timing chain or belt, incorrect sensor alignment, or an ECM that needs reprogramming.

How can I diagnose the P1336 code?

To diagnose the P1336 code, use an OBDII scanner to check for additional codes, inspect the crankshaft position sensor and wiring, and verify the timing system's condition.

What repair steps can I take for a P1336 code?

Repair steps may include replacing a faulty crankshaft position sensor, ensuring proper alignment and installation of the sensor, checking timing belt or chain for wear, and clearing the code to see if it reoccurs.

Is it safe to drive with a P1336 code?

Driving with a P1336 code is not recommended, as it can lead to poor engine performance and may cause further damage if the underlying issue is not addressed.

Can I reset the P1336 code myself?

Yes, you can reset the P1336 code using an OBDII scanner, but if the underlying issue is not fixed, the code is likely to return.

Will a P1336 code affect my vehicle's emissions?

Yes, a P1336 code can lead to increased emissions due to improper engine timing and fuel management, potentially causing your vehicle to fail an emissions test.

How much will it cost to fix a P1336 code?

The cost to fix a P1336 code can vary widely depending on the underlying issue, ranging from a simple sensor replacement costing around $100 to more complex repairs that could exceed $1,000.