AutoCodes – Isuzu – P1336 Isuzu

P1336 Isuzu Code - Crankshaft Position Sensor System Variation Not Learned

Quick Answer

P1336 Isuzu indicates Crankshaft Position Sensor System Variation Not Learned. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1336 Isuzu indicates Crankshaft Position Sensor System Variation Not Learned.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,781

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 10, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1336 Isuzu Description

OBDII Code P1336 Isuzu - Crankshaft Position Sensor System Variation Not Learned - AutoCodes.com — P1336 Isuzu Code - Crankshaft Position Sensor System Variation Not Learned

What does this mean?

What are the Possible Causes of the DTC P1336 Isuzu?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P1336 Isuzu?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1336 Isuzu code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1336 Isuzu code?

Need more information on how to fix the P1336 Isuzu code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1336 Isuzu code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1336 Isuzu Code

1. What are the common symptoms of OBDII code P1336 (Isuzu) related to the Crankshaft Position Sensor System Variation Not Learned?

- Common symptoms include rough idling, stalling, poor acceleration, and difficulty starting the vehicle.

2. What does the OBDII code P1336 (Isuzu) indicate about the Crankshaft Position Sensor System Variation Not Learned?

- This code indicates that the vehicle's Engine Control Module (ECM) has not learned the variation in the crankshaft position sensor signal.

3. What are the possible causes of OBDII code P1336 (Isuzu) being triggered?

- Possible causes include a faulty crankshaft position sensor, a damaged sensor connector, wiring issues, or an ECM software glitch.

4. How can I diagnose the cause of OBDII code P1336 (Isuzu) myself?

- You can start by checking the crankshaft position sensor and its connector for any visible damage or corrosion. Ensure the wiring is intact and properly connected.

5. Can driving with OBDII code P1336 (Isuzu) cause further damage to the vehicle?

- Continuing to drive with this code may lead to poor engine performance, increased fuel consumption, and potential damage to other engine components over time.

6. Is it safe to ignore OBDII code P1336 (Isuzu) and continue driving the vehicle?

- It is not recommended to ignore this code, as it can lead to more severe issues and potentially leave you stranded if the problem worsens.

7. How can I repair OBDII code P1336 (Isuzu) related to the Crankshaft Position Sensor System Variation Not Learned?

- Repair typically involves relearning the sensor variation using a professional diagnostic tool, replacing the crankshaft position sensor if necessary, or addressing any wiring issues.

8. Can a DIY enthusiast resolve OBDII code P1336 (Isuzu) on their own?

- Depending on the skill level and tools available, some DIY enthusiasts may be able to address this code by checking the sensor, connector, and wiring before seeking professional help.

9. How much does it cost to repair OBDII code P1336 (Isuzu)?

- The cost of repair can vary depending on the root cause of the issue, with potential costs including sensor replacement, labor charges, and diagnostic fees.

10. How long does it typically take to repair OBDII code P1336 (Isuzu)?

- The repair time can vary based on the complexity of the issue and the availability of parts, but it is generally recommended to address the problem promptly to avoid further complications.