P1336 2012 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2012 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2012 Ford Fusion Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2012 Ford Fusion?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2012 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2012 Ford Fusion code?
Need more information on how to fix the P1336 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2012 Ford Fusion Code
1. What does the OBDII code P1336 mean on a 2012 Ford Fusion?
P1336 indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) is detecting an issue with the signals from these sensors.
2. What are the common symptoms of code P1336 in a 2012 Ford Fusion?
Symptoms may include engine stalling, rough idling, difficulty starting the engine, reduced power, or the check engine light turning on.
3. What causes the P1336 code to appear on a 2012 Ford Fusion?
Common causes include a faulty crankshaft or camshaft position sensor, damaged wiring or connectors, a misaligned timing belt/chain, or a malfunctioning ECM.
4. Can I drive my 2012 Ford Fusion with a P1336 code?
It’s not recommended to drive with this code, as it can lead to engine performance issues or potential damage if the underlying problem worsens.
5. How do I fix the P1336 code on a 2012 Ford Fusion?
Repairs may involve replacing the faulty crankshaft or camshaft position sensor, repairing damaged wiring, realigning the timing components, or reprogramming the ECM.
6. How can I diagnose the P1336 code on my 2012 Ford Fusion?
Use an OBDII scanner to confirm the code, inspect the crankshaft and camshaft sensors for damage, check wiring and connectors, and verify the timing chain or belt alignment.
7. What tools are needed to fix the P1336 code on a 2012 Ford Fusion?
You’ll likely need an OBDII scanner, a multimeter for electrical testing, and basic tools for removing and replacing sensors or adjusting timing components.
8. Can a weak battery cause the P1336 code on a 2012 Ford Fusion?
A weak or failing battery can sometimes cause electrical issues that might trigger this code, but it's less common. Check the battery and charging system as part of your diagnosis.
9. Do I need to reset the ECM after fixing the P1336 code on a 2012 Ford Fusion?
Yes, after completing repairs, clear the code with an OBDII scanner and test drive the vehicle to ensure the issue is resolved.
10. How much does it cost to fix the P1336 code on a 2012 Ford Fusion?
Repair costs can vary but typically range from $100 to $300, depending on whether you replace sensors, repair wiring, or address timing issues.
Discuss the causes and fixes for P1336 2012 Ford Fusion OBDII Code
Code P1336 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
