P1336 2008 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The Camshaft Position (CMP) sensor detects the position of the camshaft. Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2008 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Faulty Camshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 2008 Ford Fusion Description
The Crankshaft Position (CKP) sensor is a magnetic transducer mounted on the engine block adjacent to a pulse wheel located on the crankshaft. By monitoring the crankshaft mounted pulse wheel, the CKP sensor is the primary sensor for ignition information to the PCM.
The PCM monitors the CKP sensor and the CMP sensor. The Diagnostic Trouble Code (DTC) sets when the PCM has detected a synchronization or erratic signal from the CKP sensor or the CMP sensors.
What are the Possible Causes of the DTC P1336 2008 Ford Fusion?
- Faulty Crankshaft Position Sensor
- Faulty Camshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 2008 Ford Fusion code?
Need more information on how to fix the P1336 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2008 Ford Fusion Code
1. What are the common symptoms of OBDII code P1336 on a 2008 Ford Fusion?
- Common symptoms include rough idling, engine misfires, difficulty starting the vehicle, and a decrease in overall engine performance.
2. What are the possible causes of OBDII code P1336 on a 2008 Ford Fusion?
- The code P1336 typically indicates an error in the input signal from either the crankshaft position sensor or the camshaft position sensor. Potential causes include sensor malfunctions, wiring issues, or a faulty PCM.
3. How can I diagnose the source of OBDII code P1336 on my 2008 Ford Fusion?
- To determine the exact cause of the code, it's recommended to perform a thorough inspection of the crankshaft and camshaft position sensors, check the sensor wiring for any damage or loose connections, and test the PCM for proper functionality.
4. Can I continue to drive my 2008 Ford Fusion with OBDII code P1336?
- While it may be possible to drive the vehicle with this code present, it's not advisable as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
5. Are there any DIY repair tips for fixing OBDII code P1336 on a 2008 Ford Fusion?
- DIY repair tips include checking and cleaning the sensor connectors, inspecting the sensor wiring for any breaks or corrosion, and replacing the faulty sensor if necessary. However, for more complex issues, it's recommended to seek professional help.
6. How much does it typically cost to repair OBDII code P1336 on a 2008 Ford Fusion?
- The cost of repairing OBDII code P1336 can vary depending on the exact cause of the issue. It may range from a simple sensor replacement costing around $100 to a more extensive repair involving the PCM, which can cost several hundred dollars.
7. Can a faulty crankshaft or camshaft position sensor cause OBDII code P1336 on a 2008 Ford Fusion?
- Yes, a malfunctioning crankshaft or camshaft position sensor can trigger code P1336 as it affects the input signal needed for proper engine operation and timing.
8. Will resetting the OBDII code P1336 on a 2008 Ford Fusion make it go away permanently?
- Resetting the code may temporarily clear the error, but if the underlying issue causing code P1336 is not addressed, it is likely to reappear. It's important to diagnose and fix the root cause of the problem.
9. Is it safe to ignore OBDII code P1336 on a 2008 Ford Fusion?
- Ignoring the code can lead to increased fuel consumption, engine performance issues, and potential engine damage. It's best to address the problem promptly to avoid further complications.
10. How long does it take to repair OBDII code P1336 on a 2008 Ford Fusion?
- The repair time for OBDII code P1336 can vary depending on the complexity of the issue and the availability of parts. It may take anywhere from 1 to 4 hours for a professional technician to diagnose and resolve the problem.
Discuss the causes and fixes for P1336 2008 Ford Fusion OBDII Code
Code P1336 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
