AutoCodes – Honda – P1336 2000 Honda Civic

P1336 2000 Honda Civic Code - Crankshaft Speed Fluctuation Sensor Intermittent Interruption

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1336 2000 Honda Civic indicates Crankshaft Speed Fluctuation Sensor Intermittent Interruption.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,500

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 21, 2021

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1336 2000 Honda Civic Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P1336 2000 Honda Civic - Crankshaft Speed Fluctuation Sensor Intermittent Interruption - AutoCodes.com — P1336 2000 Honda Civic Code - Crankshaft Speed Fluctuation Sensor Intermittent Interruption

What does this mean?

What are the Possible Causes of the DTC P1336 2000 Honda Civic?

Faulty Crankshaft Position Sensor
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection

How to Fix the DTC P1336 2000 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1336 2000 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1336 2000 Honda Civic code?

Need more information on how to fix the P1336 2000 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1336 2000 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1336 2000 Honda Civic Code

1. What are the common symptoms of OBDII code P1336 on a 2000 Honda Civic?

- Common symptoms include rough idling, engine stalling, poor acceleration, and an illuminated check engine light.

2. What does OBDII code P1336 on a 2000 Honda Civic indicate?

- This code specifically points to a Crankshaft Speed Fluctuation Sensor Intermittent Interruption.

3. What are possible causes for OBDII code P1336 on a 2000 Honda Civic?

- Possible causes include a faulty crankshaft position sensor, wiring issues, poor electrical connections, or a damaged tone ring.

4. How can I diagnose the cause of OBDII code P1336 on my 2000 Honda Civic?

- Diagnosing this code may involve checking the crankshaft position sensor signal, inspecting wiring for damage, and testing the sensor's resistance.

5. Can I drive my 2000 Honda Civic with OBDII code P1336?

- It is not recommended to drive your vehicle with this code as it can lead to engine performance issues and potential damage if left unresolved.

6. How much does it cost to repair OBDII code P1336 on a 2000 Honda Civic?

- The cost of repair can vary depending on the exact cause, but it may involve replacing the crankshaft position sensor or repairing wiring issues.

7. Are there any DIY repair tips for fixing OBDII code P1336 on a 2000 Honda Civic?

- DIY repair tips include ensuring proper sensor installation, checking and cleaning electrical connections, and inspecting wiring for any visible damage.

8. Can a bad crankshaft position sensor cause OBDII code P1336 on a 2000 Honda Civic?

- Yes, a faulty crankshaft position sensor is a common culprit for triggering code P1336 due to its role in measuring engine speed fluctuations.

9. How urgent is it to address OBDII code P1336 on a 2000 Honda Civic?

- It is important to address this code promptly to prevent potential engine performance issues and avoid further damage to your vehicle.

10. Is it possible for OBDII code P1336 on a 2000 Honda Civic to be a false alarm?

- While rare, false alarms can occur with any diagnostic trouble code. It is recommended to verify the issue through proper diagnosis before proceeding with repairs.