P1336 1996 Honda Civic Code - Crankshaft Speed Fluctuation Sensor Intermittent Interruption
Quick Answer
The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 1996 Honda Civic indicates Crankshaft Speed Fluctuation Sensor Intermittent Interruption.
- Common causes
- Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1336 1996 Honda Civic Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
What are the Possible Causes of the DTC P1336 1996 Honda Civic?
- Faulty Crankshaft Position Sensor
- Crankshaft Position Sensor harness is open or shorted
- Crankshaft Position Sensor circuit poor electrical connection
How to Fix the DTC P1336 1996 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1336 1996 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1336 1996 Honda Civic code?
Need more information on how to fix the P1336 1996 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 1996 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 1996 Honda Civic Code
1. What are the common symptoms of OBDII code P1336 in a 1996 Honda Civic?
- Common symptoms include rough idle, engine hesitation, stalling, and poor acceleration.
2. What does OBDII code P1336 on a 1996 Honda Civic indicate?
- This code indicates an intermittent interruption in the signal from the crankshaft speed fluctuation sensor.
3. What are the possible causes of OBDII code P1336 on a 1996 Honda Civic?
- Possible causes include a faulty crankshaft speed fluctuation sensor, wiring issues, poor electrical connections, or a malfunctioning PCM.
4. How can I diagnose the cause of OBDII code P1336 in my 1996 Honda Civic?
- Diagnose by inspecting the sensor and its wiring for damage, testing the sensor's resistance, and checking for proper voltage supply and ground connections.
5. Can I still drive my 1996 Honda Civic with OBDII code P1336?
- It is not recommended to drive the vehicle with this code as it can lead to further engine damage and potential safety hazards.
6. How can I repair OBDII code P1336 on a 1996 Honda Civic?
- Repair involves replacing the faulty crankshaft speed fluctuation sensor, repairing any damaged wiring, and ensuring all electrical connections are secure.
7. Is it possible to reset OBDII code P1336 on a 1996 Honda Civic without fixing the issue?
- Resetting the code without addressing the underlying problem will likely result in the code returning once the issue persists.
8. Can a DIY enthusiast fix OBDII code P1336 on a 1996 Honda Civic?
- While some DIYers may be able to replace the sensor and check wiring, diagnosing and repairing electrical issues may require professional expertise.
9. How much does it typically cost to repair OBDII code P1336 on a 1996 Honda Civic at a mechanic?
- The cost can vary depending on the location and specific repairs needed, but it may range from $100 to $300 for parts and labor.
10. Are there any preventive measures to avoid OBDII code P1336 in a 1996 Honda Civic?
- Regular maintenance, such as checking and cleaning sensor connections, can help prevent issues leading to code P1336.
Discuss the causes and fixes for P1336 1996 Honda Civic OBDII Code
Code P1336 1996 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
