P1335 Hyundai Code - #5 MF Signal Line Short
Quick Answer
P1335 Hyundai indicates #5 MF Signal Line Short. Common causes for P1335 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1335 Hyundai indicates #5 MF Signal Line Short.
- Common causes
- Common causes for P1335 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1335 Hyundai Description
How to Fix the DTC P1335 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1335 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1335 Hyundai code?
Need more information on how to fix the P1335 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1335 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1335 Hyundai Code
1. What does the OBDII code P1335 mean on a Hyundai?
The P1335 code on a Hyundai indicates an issue with the #5 MF Signal Line, specifically a short circuit.
2. What are the symptoms of code P1335 in a Hyundai?
Symptoms may include rough engine performance, stalling, difficulty starting, or the check engine light illuminating.
3. What causes the P1335 code to appear on a Hyundai?
Common causes include a damaged or shorted #5 MF signal wire, a faulty engine control module (ECM), or a malfunctioning sensor related to the signal line.
4. How is code P1335 diagnosed on a Hyundai?
A technician will inspect the wiring and connectors for damage, test the #5 MF signal line for continuity, and check the ECM and related sensors.
5. Can I drive my Hyundai with the P1335 code active?
Driving with the P1335 code is not recommended, as it can lead to poor engine performance and potential damage to other components.
6. How do I fix the P1335 code on my Hyundai?
Repairs typically involve replacing or repairing damaged wiring, addressing sensor issues, or, in rare cases, replacing the ECM.
7. How much does it cost to fix the P1335 code on a Hyundai?
Repair costs vary depending on the issue but can range from $100 for simple wiring repairs to $1,000 or more if the ECM needs replacement.
8. Can a loose connector cause the P1335 code on a Hyundai?
Yes, a loose or corroded connector in the #5 MF signal line can trigger the P1335 code.
9. Will clearing the code with a scan tool fix the P1335 issue?
Clearing the code will remove it temporarily but will not resolve the underlying problem causing the short.
10. Is the P1335 code specific to Hyundai vehicles?
The P1335 code is commonly associated with Hyundai models but may also appear on other makes with similar diagnostic setups, though the fault specifics may differ.
Discuss the causes and fixes for P1335 Hyundai OBDII Code
Code P1335 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
