AutoCodes – Toyota – P1335 2000 Toyota Camry

P1335 2000 Toyota Camry Code - Crankshaft Position Sensor Circuit Fault

Quick Answer

Crankshaft Position Sensor (NE signal) consist of a signal plate and pick up coil. Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1335 2000 Toyota Camry indicates Crankshaft Position Sensor Circuit Fault.
Common causes: Common causes include Faulty Crankshaft Position Sensor, Crankshaft Position (CKP) Sensor harness is open or shorted, Crankshaft Position (CKP) Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,655

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 10, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1335 2000 Toyota Camry Description

Crankshaft Position Sensor (NE signal) consist of a signal plate and pick up coil. The NE signal plate has 34 teeth and is mounted on the crankshaft. The NE signal sensor generates 34
signals of every engine revolution. The Engine Control Module (ECM) detects the standard crankshaft angle based on the signals, and the actual crankshaft angle the engine speed by the NE signals.

OBDII Code P1335 2000 Toyota Camry - Crankshaft Position Sensor Circuit Fault - AutoCodes.com — P1335 2000 Toyota Camry Code - Crankshaft Position Sensor Circuit Fault

What does this mean?

What are the Possible Causes of the DTC P1335 2000 Toyota Camry?

Faulty Crankshaft Position Sensor
Crankshaft Position (CKP) Sensor harness is open or shorted
Crankshaft Position (CKP) Sensor circuit poor electrical connection
ECM

How to Fix the DTC P1335 2000 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1335 2000 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1335 2000 Toyota Camry code?

Need more information on how to fix the P1335 2000 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1335 2000 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1335 2000 Toyota Camry Code

1. What are the common symptoms of OBDII code P1335 in a 2000 Toyota Camry?

- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in overall performance.

2. What is the main cause of the P1335 code in a 2000 Toyota Camry?

- The main cause is usually a faulty crankshaft position sensor or a wiring issue in the sensor circuit.

3. How can I diagnose the P1335 code in my 2000 Toyota Camry?

- Diagnosing the code involves checking the crankshaft position sensor for proper operation, inspecting the wiring for any damage, and ensuring the sensor is correctly connected.

4. Can a bad crankshaft position sensor be repaired, or does it need to be replaced?

- In most cases, a faulty crankshaft position sensor will need to be replaced rather than repaired to ensure proper functioning of the engine.

5. Are there any DIY tips for fixing the P1335 code in a 2000 Toyota Camry?

- DIY tips include checking the sensor connections, inspecting the wiring harness for any visible damage, and cleaning the sensor to see if it resolves the issue.

6. What happens if the P1335 code is ignored in a 2000 Toyota Camry?

- Ignoring the P1335 code can lead to more severe engine issues, such as further damage to engine components, decreased fuel efficiency, and possible engine failure.

7. How much does it typically cost to repair the P1335 code in a 2000 Toyota Camry?

- The cost of repairing the P1335 code can vary depending on the extent of the issue, but it generally ranges from $150 to $300 for parts and labor.

8. Can a mechanic reset the P1335 code in a 2000 Toyota Camry after the issue is fixed?

- Yes, a mechanic can reset the code using an OBDII scanner after the underlying problem causing the P1335 code has been resolved.

9. Is it safe to continue driving a 2000 Toyota Camry with the P1335 code present?

- It is not recommended to drive the vehicle with the P1335 code present, as it can lead to potential engine problems and safety hazards on the road.

10. How long does it take to repair the P1335 code in a 2000 Toyota Camry?

- The repair time can vary depending on the exact cause of the issue, but it typically takes around 1-2 hours for a mechanic to diagnose and fix the problem.