P1332 Volvo Code - Camshaft Reset Valve
Quick Answer
The Diagnostic Trouble Code (DTC) is stored in the Engine Control Module (ECM) if the camshaft is not in the correct position. Common causes include Faulty CVVT Solenoid, CVVT Solenoid harness is open or shorted, CVVT Solenoid circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1332 Volvo indicates Camshaft Reset Valve.
- Common causes
- Common causes include Faulty CVVT Solenoid, CVVT Solenoid harness is open or shorted, CVVT Solenoid circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P1332 Volvo Description
The ECM registers a fault and DTC is stored in the ECM if the camshaft position (CMP) sensor flanker is not correct in relation to the engine speed (RPM) sensor.
The ECM registers a fault and DTC is stored in the ECM if the camshaft does not rotate quickly enough in response to the control signal.
What are the Possible Causes of the DTC P1332 Volvo?
- Faulty CVVT Solenoid
- CVVT Solenoid harness is open or shorted
- CVVT Solenoid circuit poor electrical connection
- Faulty Camshaft Position (CMP) Sensor
- Camshaft belt has jumped out of place
How to Fix the DTC P1332 Volvo?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1332 Volvo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1332 Volvo code?
Need more information on how to fix the P1332 Volvo code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1332 Volvo code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1332 Volvo Code
1. What does OBDII code P1332 in a Volvo indicate?
The OBDII code P1332 in a Volvo refers to a fault with the Camshaft Reset Valve.
2. What are the common symptoms of a Camshaft Reset Valve issue (P1332) in a Volvo?
Common symptoms of a Camshaft Reset Valve issue include rough idling, loss of power, and poor engine performance.
3. What can cause the Camshaft Reset Valve fault code P1332 in a Volvo?
The Camshaft Reset Valve fault code P1332 in a Volvo can be caused by a faulty Camshaft Reset Valve, wiring issues, or a malfunctioning engine control module (ECM).
4. How can I diagnose a Camshaft Reset Valve problem triggering code P1332 in my Volvo?
Diagnosing a Camshaft Reset Valve problem causing code P1332 may involve checking the valve for proper operation, inspecting the wiring for damage, and performing a scan tool diagnosis to pinpoint the issue.
5. Can I continue driving my Volvo with OBDII code P1332 related to the Camshaft Reset Valve issue?
It is not recommended to continue driving your Volvo with the Camshaft Reset Valve issue triggering code P1332, as it can lead to further damage to the engine.
6. How can I repair a Camshaft Reset Valve problem causing OBDII code P1332 in my Volvo?
Repairing a Camshaft Reset Valve problem related to OBDII code P1332 may involve replacing the faulty valve, repairing damaged wiring, or reprogramming the ECM.
7. Are there any DIY tips for fixing a Camshaft Reset Valve issue leading to OBDII code P1332 in a Volvo?
While some basic checks like inspecting wiring connections can be done DIY, it is recommended to seek professional help for diagnosing and repairing Camshaft Reset Valve issues triggering OBDII code P1332.
8. Can a faulty Camshaft Reset Valve causing code P1332 affect fuel efficiency in a Volvo?
Yes, a faulty Camshaft Reset Valve causing code P1332 can impact fuel efficiency by affecting the engine's performance and combustion process.
9. How much does it typically cost to repair a Camshaft Reset Valve problem associated with OBDII code P1332 in a Volvo?
The cost of repairing a Camshaft Reset Valve issue linked to OBDII code P1332 in a Volvo can vary depending on the extent of the problem, parts needed, and labor costs, but it could range from $200 to $500 or more.
10. Is it necessary to clear the OBDII code P1332 after fixing the Camshaft Reset Valve issue in a Volvo?
Yes, it is recommended to clear the OBDII code P1332 after fixing the Camshaft Reset Valve issue in a Volvo to reset the vehicle's engine management system and ensure proper operation.
Discuss the causes and fixes for P1332 Volvo OBDII Code
-
Need new camshaft solenoid valve is there one or two on a 2001 Volvo v70 XC ? And which is it the one with the gasket or the one with the wire it will not let me upload images .My email is [email protected]
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
