AutoCodes – Toyota – P1310 2002 Toyota Echo

P1310 2002 Toyota Echo Code - Igniter Circuit Malfunction No. 3

Quick Answer

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Common causes include Faulty Ignition Coil No, 3, Ignition Coil No. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1310 2002 Toyota Echo indicates Igniter Circuit Malfunction No. 3.
Common causes: Common causes include Faulty Ignition Coil No, 3, Ignition Coil No.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,639

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 09, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1310 2002 Toyota Echo Description

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Ignitor is integral to ignition coil. The Engine Control Module (ECM) determines ignition timing and outputs a ignition signal (IGT) for each cylinder. Based on the IGT signals, power transistors in the ignitor cut of current to primary coil in ignition coil, causing ignition coil to fire spark plug. After delivering a command to turn off primary circuit on the IGT wire, ECM monitors IGF circuit to ensure primary switching occurred.

OBDII Code P1310 2002 Toyota Echo - Igniter Circuit Malfunction No. 3 - AutoCodes.com — P1310 2002 Toyota Echo Code - Igniter Circuit Malfunction No. 3

What does this mean?

What are the Possible Causes of the DTC P1310 2002 Toyota Echo?

Faulty Ignition Coil No. 3
Ignition Coil No. 3 harness is open or shorted
Ignition Coil No. 3 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P1310 2002 Toyota Echo?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1310 2002 Toyota Echo code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1310 2002 Toyota Echo code?

Need more information on how to fix the P1310 2002 Toyota Echo code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1310 2002 Toyota Echo code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1310 2002 Toyota Echo Code

1. What are the common symptoms of OBDII code P1310 in a 2002 Toyota Echo?

- Common symptoms include engine misfires, rough idling, difficulty starting the engine, and a noticeable decrease in fuel efficiency.

2. What causes the OBDII code P1310 (Igniter Circuit Malfunction No. 3) in a 2002 Toyota Echo?

- The primary cause of this code is usually a faulty igniter (ignition coil) or a problem within the igniter circuit.

3. How can I diagnose the issue related to code P1310 in my 2002 Toyota Echo?

- A thorough inspection of the igniter, spark plugs, spark plug wires, and related connections is recommended. Using a multimeter to test the components can help pinpoint the problem.

4. Can a DIY enthusiast repair the Igniter Circuit Malfunction No. 3 in a 2002 Toyota Echo?

- Depending on your skill level, you may be able to replace the faulty igniter or repair the wiring yourself. However, if you're unsure, it's best to seek professional assistance.

5. What are some tips for repairing OBDII code P1310 in a 2002 Toyota Echo?

- Ensure the ignition system components are properly connected and not damaged. Replace any faulty parts, such as the igniter or spark plugs, to resolve the issue.

6. Is it safe to continue driving my 2002 Toyota Echo with OBDII code P1310 active?

- It is not recommended to drive the vehicle with this code active, as it can lead to engine performance issues and potential damage over time. It's best to address the problem promptly.

7. How much does it typically cost to repair Igniter Circuit Malfunction No. 3 in a 2002 Toyota Echo?

- The cost can vary depending on the specific issue and whether you choose to do the repair yourself or take it to a professional. Replacement igniters can range from $50 to $150.

8. Are there any recalls or technical service bulletins related to OBDII code P1310 in a 2002 Toyota Echo?

- It's recommended to check with Toyota or authorized dealerships for any recalls or technical service bulletins related to this specific issue in the 2002 Toyota Echo.

9. Will resetting the OBDII code P1310 in my 2002 Toyota Echo make it go away permanently?

- Resetting the code may temporarily turn off the Check Engine light, but if the underlying issue is not addressed, the code is likely to return. It's crucial to diagnose and fix the root cause.

10. How can I prevent OBDII code P1310 from appearing in my 2002 Toyota Echo in the future?

- Regular maintenance, such as checking and replacing spark plugs and ignition components at recommended intervals, can help prevent issues leading to code P1310 in the future.