P1309 KIA Code - Chassis Acceleration Sensor Signal High
Quick Answer
The Chassis acceleration(Rough Road) sensor consists of a piezoelectric vibration pick up which detects vertical acceleration of the vehicle.The sensor signal is used by the ECM to determine the degree of vertical movement of the car, for example, on a bumpy road.Since this may also cause uneven engine running, the ECM uses the signal to distinguish the phenomenon from actual misfiring. Common causes include Faulty Chassis Acceleration Sensor, Chassis Acceleration Sensor harness is open or shorted, Chassis Acceleration Sensor circuit poor electrical conection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1309 KIA indicates Chassis Acceleration Sensor Signal High.
- Common causes
- Common causes include Faulty Chassis Acceleration Sensor, Chassis Acceleration Sensor harness is open or shorted, Chassis Acceleration Sensor circuit poor electrical conection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1309 KIA Description
What are the Possible Causes of the DTC P1309 KIA?
- Faulty Chassis Acceleration Sensor
- Chassis Acceleration Sensor harness is open or shorted
- Chassis Acceleration Sensor circuit poor electrical conection
How to Fix the DTC P1309 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1309 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1309 KIA code?
Need more information on how to fix the P1309 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1309 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1309 KIA Code
1. What does the OBDII code P1309 mean on a KIA?
P1309 indicates a "Chassis Acceleration Sensor Signal High," meaning the sensor is reporting an unusually high or out-of-range voltage signal.
2. What are the common symptoms of the P1309 code in a KIA?
Symptoms may include rough idling, decreased fuel efficiency, poor acceleration, or the vehicle's traction or stability control systems malfunctioning.
3. What causes the P1309 code on a KIA?
Possible causes include a faulty chassis acceleration sensor, damaged or corroded wiring, a poor electrical connection, or issues with the vehicle's control module.
4. Can I drive my KIA with the P1309 code?
Driving with the P1309 code is not recommended, as it may affect vehicle stability or safety systems, potentially leading to unsafe driving conditions.
5. How do I fix the P1309 code on a KIA?
Repairs may involve replacing the faulty chassis acceleration sensor, repairing or replacing damaged wiring, or reprogramming or replacing the control module if necessary.
6. Where is the chassis acceleration sensor located on a KIA?
The chassis acceleration sensor is typically located near the suspension system or mounted on the vehicle's frame, but the exact location may vary depending on the model.
7. How do I diagnose the P1309 code on a KIA?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the sensor and its wiring for damage, and testing the sensor's output with a multimeter.
8. What tools are needed to fix the P1309 code on a KIA?
Common tools include an OBDII scanner, multimeter, basic hand tools, and possibly a wiring diagram for your specific KIA model.
9. How much does it cost to repair the P1309 code on a KIA?
Repair costs vary but can range from $100 to $300 or more, depending on whether the sensor, wiring, or control module needs replacement.
10. Can a bad chassis acceleration sensor cause other issues in my KIA?
Yes, a faulty sensor can interfere with the vehicle's stability or traction control systems, potentially leading to handling issues or triggering additional error codes.
Discuss the causes and fixes for P1309 KIA OBDII Code
Code P1309 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
