P1307 KIA Code - Accelerator Sensor Range/Performance
Quick Answer
The Chassis acceleration(Rough Road) sensor consists of a piezoelectric vibration pick up which detects vertical acceleration of the vehicle.The sensor signal is used by the ECM to determine the degree of vertical movement of the car, for example, on a bumpy road.Since this may also cause uneven engine running, the ECM uses the signal to distinguish the phenomenon from actual misfiring. Common causes include Faulty Acceleration Sensor, Acceleration Sensor harness is open or shorted, Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1307 KIA indicates Accelerator Sensor Range/Performance.
- Common causes
- Common causes include Faulty Acceleration Sensor, Acceleration Sensor harness is open or shorted, Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1307 KIA Description
What are the Possible Causes of the DTC P1307 KIA?
- Faulty Acceleration Sensor
- Acceleration Sensor harness is open or shorted
- Acceleration Sensor circuit poor electrical connection
How to Fix the DTC P1307 KIA?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1307 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1307 KIA code?
Need more information on how to fix the P1307 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1307 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1307 KIA Code
1. What are the common symptoms of OBDII code P1307 in a KIA related to the Accelerator Sensor Range/Performance issue?
- Common symptoms may include poor acceleration, engine hesitation, rough idling, and even stalling.
2. What are the potential causes of the OBDII code P1307 indicating Accelerator Sensor Range/Performance problem in a KIA?
- The code P1307 in a KIA could be triggered by a faulty accelerator pedal position sensor, throttle position sensor, wiring issues, or a problem with the engine control module.
3. How can I diagnose the cause of OBDII code P1307 in my KIA related to the Accelerator Sensor Range/Performance issue?
- It is recommended to use a diagnostic scanner to retrieve the specific fault codes, visually inspect the sensors and wiring for any visible damage, and perform voltage and resistance tests on the sensors.
4. Are there any simple repair tips for fixing the Accelerator Sensor Range/Performance issue indicated by OBDII code P1307 in a KIA?
- Basic repair steps may include cleaning the sensors, checking and repairing any damaged wiring, and clearing the fault codes to see if the issue persists.
5. Can driving with the OBDII code P1307 related to Accelerator Sensor Range/Performance problem in my KIA cause further damage?
- Continuing to drive with this issue may lead to poor engine performance, reduced fuel efficiency, and potential safety hazards, so it is advisable to address the problem promptly.
6. Is it safe to reset the OBDII code P1307 without repairing the underlying Accelerator Sensor Range/Performance problem in a KIA?
- While clearing the code may temporarily turn off the check engine light, it is crucial to diagnose and fix the root cause to prevent the issue from recurring and potentially causing more significant problems.
7. How much does it typically cost to repair the Accelerator Sensor Range/Performance issue causing OBDII code P1307 in a KIA?
- The cost of repairs can vary depending on the exact cause of the problem, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can a DIY enthusiast with basic mechanical skills fix the Accelerator Sensor Range/Performance problem indicated by OBDII code P1307 in a KIA?
- Depending on the specific cause, some DIY repairs like sensor cleaning or simple wiring fixes may be possible, but more complex issues may require professional diagnosis and repair.
9. How long can I safely drive my KIA with the OBDII code P1307 related to Accelerator Sensor Range/Performance issue before getting it repaired?
- It is recommended to address the problem as soon as possible to prevent further damage and potential safety risks associated with poor engine performance and drivability issues.
10. Will fixing the Accelerator Sensor Range/Performance issue causing OBDII code P1307 in my KIA improve fuel efficiency and overall engine performance?
- Yes, resolving the underlying issue triggering the code P1307 can lead to improved fuel efficiency, smoother acceleration, and better overall engine performance in your KIA.
Discuss the causes and fixes for P1307 KIA OBDII Code
Code P1307 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
