P1303 Hyundai Code - TDC Sensor High Input
Quick Answer
P1303 Hyundai indicates TDC Sensor High Input. Common causes include Faulty Top Dead Center (TDC), Top Dead Center harness is open or shorted, Top Dead Center circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1303 Hyundai indicates TDC Sensor High Input.
- Common causes
- Common causes include Faulty Top Dead Center (TDC), Top Dead Center harness is open or shorted, Top Dead Center circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1303 Hyundai Description
What are the Possible Causes of the DTC P1303 Hyundai?
- Faulty Top Dead Center (TDC)
- Top Dead Center harness is open or shorted
- Top Dead Center circuit poor electrical connection
How to Fix the DTC P1303 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1303 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1303 Hyundai code?
Need more information on how to fix the P1303 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1303 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1303 Hyundai Code
1. What does the OBDII code P1303 mean on a Hyundai?
P1303 indicates a "TDC Sensor High Input," meaning the signal from the Top Dead Center (TDC) sensor is higher than expected, potentially causing engine timing issues.
2. What are the common symptoms of the P1303 code in a Hyundai?
Common symptoms include poor engine performance, hard starting, rough idling, misfires, and possible stalling.
3. What causes the P1303 code in a Hyundai?
Possible causes include a faulty TDC sensor, damaged sensor wiring, poor electrical connections, or a malfunctioning engine control module (ECM).
4. Can I drive my Hyundai with the P1303 code?
Driving with the P1303 code is not recommended, as it can lead to performance issues, misfires, or even engine damage if not addressed promptly.
5. How is the P1303 code diagnosed in a Hyundai?
A mechanic will use a scan tool to verify the code, inspect the TDC sensor and its wiring, and test the sensor’s voltage and signal output.
6. How do you fix the P1303 code on a Hyundai?
Repairs may involve replacing the faulty TDC sensor, repairing or replacing damaged wiring, cleaning electrical connectors, or reprogramming/replacing the ECM if necessary.
7. Where is the TDC sensor located on a Hyundai?
The TDC sensor is typically located near the engine's crankshaft or camshaft, depending on the specific Hyundai model.
8. Can a dirty connector cause the P1303 code in a Hyundai?
Yes, a corroded or dirty connector can disrupt the signal from the TDC sensor, triggering the P1303 code.
9. How much does it cost to fix the P1303 code on a Hyundai?
The repair cost can range from $100 to $300, depending on whether the sensor, wiring, or ECM needs replacement or repair.
10. Can a failing TDC sensor cause misfires in a Hyundai?
Yes, a failing TDC sensor can cause improper engine timing, leading to misfires and rough engine operation.
Discuss the causes and fixes for P1303 Hyundai OBDII Code
Code P1303 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
