P1297 Dodge Code - No Change In MAP Sensor Voltage
Quick Answer
The Diagnostic Trouble Code (DTC) will be set when the Engine Control Module (ECM) detects no change in Manifold Absolute Pressure (MAP) sensor voltage. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Restricted Manifold Absolute Pressure Sensor, Manifold Absolute Pressure Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1297 Dodge indicates No Change In MAP Sensor Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Restricted Manifold Absolute Pressure Sensor, Manifold Absolute Pressure Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1297 Dodge Description
What are the Possible Causes of the DTC P1297 Dodge?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Restricted Manifold Absolute Pressure Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1297 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1297 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1297 Dodge code?
Need more information on how to fix the P1297 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1297 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1297 Dodge Code
1. What are the common symptoms of OBDII code P1297 in a Dodge related to no change in MAP sensor voltage?
- Common symptoms include poor engine performance, decreased fuel efficiency, and potential stalling or rough idling.
2. What are some possible causes of OBDII code P1297 in a Dodge indicating no change in MAP sensor voltage?
- Potential causes include a faulty MAP sensor, damaged wiring or connectors in the MAP sensor circuit, or a malfunctioning powertrain control module (PCM).
3. How can I diagnose the root cause of OBDII code P1297 in my Dodge when there is no change in MAP sensor voltage?
- You can start by checking the MAP sensor wiring and connectors for any signs of damage or corrosion. You may also want to conduct a thorough inspection of the MAP sensor itself and test it using a multimeter.
4. What are some repair tips for addressing OBDII code P1297 in a Dodge due to no change in MAP sensor voltage?
- Repair tips may include replacing a faulty MAP sensor, repairing damaged wiring or connectors, or reprogramming the PCM if necessary. It's also a good idea to clear the code after completing repairs and test driving the vehicle to ensure the issue is resolved.
5. Can a dirty or clogged MAP sensor cause OBDII code P1297 in a Dodge to trigger with no change in voltage?
- Yes, a dirty or clogged MAP sensor can potentially cause the sensor to malfunction and trigger the P1297 code. Cleaning or replacing the MAP sensor may help resolve the issue.
6. Is it safe to continue driving my Dodge with OBDII code P1297 related to no change in MAP sensor voltage?
- While the vehicle may still be operational with this code present, it is not recommended to ignore the issue as it can lead to further damage and potentially unsafe driving conditions. It's best to address the problem promptly.
7. How much does it typically cost to repair OBDII code P1297 in a Dodge caused by no change in MAP sensor voltage?
- The cost of repairs can vary depending on the specific cause of the issue and labor rates in your area. Replacing a MAP sensor or repairing wiring may cost a few hundred dollars, but it's best to consult a mechanic for an accurate estimate.
8. Will resetting the PCM clear OBDII code P1297 on a Dodge if the issue is related to no change in MAP sensor voltage?
- Resetting the PCM may temporarily clear the code, but if the underlying issue with the MAP sensor voltage persists, the code is likely to return. It's essential to diagnose and address the root cause of the problem for a lasting solution.
9. How long does it typically take to repair OBDII code P1297 in a Dodge due to no change in MAP sensor voltage?
- The repair time can vary depending on the complexity of the issue and the availability of parts. Simple fixes like cleaning a sensor or replacing a connector may only take a short time, while more involved repairs could require several hours or more.
10. Can extreme weather conditions affect the MAP sensor and trigger OBDII code P1297 in a Dodge indicating no change in voltage?
- Yes, extreme heat or cold can impact the performance of the MAP sensor and potentially lead to the P1297 code. It's essential to take precautions to protect the sensor from harsh weather conditions and ensure proper functioning.
Discuss the causes and fixes for P1297 Dodge OBDII Code
-
I have an 01 chry. Town and country van. I had eng codes 1297. I changed Map sensor and TPs and I'm still getting code 1297 and it's still running rough.
-
Other than the MAP sensor, the Spark Plugs are the most likely cause that could trigger the P1297 code. When was the last time you change the spark plugs?
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
