P1296 Dodge Code - No 5 Volt Reference Voltage To Manifold Absolute Pressure
Quick Answer
The Manifold Absolute Pressure (MAP) sensor voltage is monitored when the ignition is ON, and battery voltage is more than 10.4 volts. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1296 Dodge indicates No 5 Volt Reference Voltage To Manifold Absolute Pressure.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1296 Dodge Description
What are the Possible Causes of the DTC P1296 Dodge?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1296 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1296 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1296 Dodge code?
Need more information on how to fix the P1296 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1296 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1296 Dodge Code
No Frequently Asked Questions about P1296 Dodge Code found.
Discuss the causes and fixes for P1296 Dodge OBDII Code
-
Check engine light came on got a cold p1296 map sensor replace the map sensor clear the code truck ran fine for couple days then it died same code came up cleared the code again waited a few minutes truck started back up again ran fine for another day died again clear the code and it ran fine now it did it again same code came up this time cleared it a few times but this time won't start
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
