P1289 2011 Ford Fusion Code - Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
Quick Answer
The Cylinder Head Temperature (CHT) Sensor is mounted into the wall of the cylinder head and is not connected to any coolant passages. Common causes include Wrong thermostat, Engine overheated, Low engine coolant level. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1289 2011 Ford Fusion indicates Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range.
- Common causes
- Common causes include Wrong thermostat, Engine overheated, Low engine coolant level.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1289 2011 Ford Fusion Description
What are the Possible Causes of the DTC P1289 2011 Ford Fusion?
- Wrong thermostat
- Engine overheated
- Low engine coolant level
- Faulty Cylinder Head Temperature (CHT) sensor
- Cylinder Head Temperature (CHT) sensor harness is open or shorted
- Cylinder Head Temperature (CHT) sensor circuit poor electrical connection
How to Fix the DTC P1289 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1289 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1289 2011 Ford Fusion code?
Need more information on how to fix the P1289 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1289 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1289 2011 Ford Fusion Code
1. What does the OBDII code P1289 mean on a 2011 Ford Fusion?
P1289 indicates that the Cylinder Head Temperature (CHT) sensor is sending a signal that is out of the expected range during self-test, often due to a sensor or wiring issue.
2. What are common symptoms of the P1289 code?
Common symptoms include engine overheating, poor performance, the check engine light illuminating, and possibly the engine shutting down to prevent damage.
3. What causes the P1289 code on a Ford Fusion?
The most common causes are a faulty Cylinder Head Temperature sensor, damaged or corroded wiring, a loose or disconnected sensor connector, or an engine overheating issue.
4. Can the P1289 code cause engine damage?
Yes, if the engine is actually overheating and the issue is not resolved, it can lead to severe engine damage, such as a blown head gasket or warped cylinder head.
5. How do you diagnose the P1289 code?
Start by inspecting the CHT sensor and its wiring for damage or corrosion. Check the coolant level and for any signs of overheating. Use a scan tool to monitor the sensor’s readings and compare them to expected values.
6. Is it safe to drive with a P1289 code?
It is not recommended to drive with this code. If the engine is overheating, continuing to drive could result in significant engine damage.
7. How do you fix the P1289 code on a 2011 Ford Fusion?
Fixes may include replacing the CHT sensor, repairing damaged wiring or connectors, ensuring proper coolant levels, or addressing any underlying overheating issues.
8. How much does it cost to repair the P1289 code?
Depending on the issue, repairs can range from $50-$150 for a sensor replacement to over $1,000 if significant engine overheating damage has occurred.
9. Can low coolant levels trigger the P1289 code?
Yes, low coolant levels can cause the engine to overheat, which may result in the P1289 code being triggered.
10. Will clearing the P1289 code fix the problem?
Clearing the code will turn off the check engine light temporarily, but the issue will persist unless the underlying problem is addressed.
Discuss the causes and fixes for P1289 2011 Ford Fusion OBDII Code
Code P1289 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
