AutoCodes – Jeep – P1275 Jeep

P1275 Jeep Code - A/C Clutch Control Circuit 2 Over Current

Quick Answer

The Totally Integrated Power Module (TIPM) monitors the A/C Clutch Control Circuit 2. Common causes include Faulty A/C Compressor Clutch, A/C Compressor Clutch harness is open or shorted, A/C Compressor Clutch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: P1275 Jeep indicates A/C Clutch Control Circuit 2 Over Current.
Common causes: Common causes include Faulty A/C Compressor Clutch, A/C Compressor Clutch harness is open or shorted, A/C Compressor Clutch circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,613

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 20, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1275 Jeep Description

The Totally Integrated Power Module (TIPM) monitors the A/C Clutch Control Circuit 2. The TIPM sets the Diagnostic Trouble Code (DTC) when an overcurrent condition has been detected in the Air Condition (A/C) Clutch control circuit.

OBDII Code P1275 Jeep - A/C Clutch Control Circuit 2 Over Current - AutoCodes.com — P1275 Jeep Code - A/C Clutch Control Circuit 2 Over Current

What does this mean?

What are the Possible Causes of the DTC P1275 Jeep?

Faulty A/C Compressor Clutch
A/C Compressor Clutch harness is open or shorted
A/C Compressor Clutch circuit poor electrical connection
Faulty Totally Integrated Power Module (TIPM)

How to Fix the DTC P1275 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1275 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1275 Jeep code?

Need more information on how to fix the P1275 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1275 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1275 Jeep Code

1. What does the OBDII code P1275 mean on a Jeep?

P1275 refers to "A/C Clutch Control Circuit 2 Over Current," indicating an electrical issue in the air conditioning clutch circuit that may involve excessive current flow.

2. What are the common symptoms of code P1275 on a Jeep?

Symptoms may include the air conditioning not functioning, inconsistent A/C operation, illuminated check engine light, or strange noises from the A/C system.

3. What causes the P1275 code to appear on a Jeep?

Common causes include a shorted A/C clutch coil, a faulty A/C relay, damaged wiring or connectors, or a malfunctioning PCM (Powertrain Control Module).

4. Can a blown fuse trigger the P1275 code?

Yes, a blown fuse in the A/C clutch circuit could result in the P1275 code by disrupting proper current flow.

5. How do I diagnose the P1275 code on my Jeep?

Start by inspecting the A/C clutch wiring and connectors for damage or corrosion. Check the A/C relay, test the clutch coil resistance, and ensure the fuse is intact.

6. Is the P1275 code dangerous to drive with?

While it may not pose an immediate safety risk, driving with this code can leave you without functional air conditioning and may indicate a more serious electrical issue if left unresolved.

7. How do I fix the P1275 code on a Jeep?

Repairs may include replacing a damaged A/C clutch, fixing or replacing faulty wiring, replacing the A/C relay, or reprogramming or replacing the PCM if necessary.

8. Can the P1275 code clear itself after a repair?

The code may clear itself after fixing the issue, but in many cases, youâ€™ll need to use an OBDII scanner to manually clear it.

9. What tools do I need to troubleshoot the P1275 code?

Youâ€™ll need an OBDII scanner, a multimeter to test resistance and voltage, and possibly wiring diagrams for your Jeepâ€™s A/C system.

10. How much does it cost to fix the P1275 code?

Costs vary depending on the root cause. A simple fuse or relay replacement may cost under $50, while replacing the A/C clutch or PCM could cost several hundred dollars.