P1273 Code - Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) Sensor 1 Bank 1, Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted, Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1273 indicates Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) Sensor 1 Bank 1, Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted, Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1273 Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide λ range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance.
An electronic circuit controls the pump current through the oxygen-pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800 C (1,292 - 1,472 F).
What are the Possible Causes of the DTC P1273?
- Faulty Air fuel ratio (A/F) Sensor 1 Bank 1
- Air fuel ratio (A/F) Sensor 1 Bank 1 harness is open or shorted
- Air fuel ratio (A/F) Sensor 1 Bank 1 circuit poor electrical connection
- Fuel pressure
- Faulty Fuel injector
- Faulty Air Flow Meter
How to Fix the DTC P1273?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1273 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1273 code?
Need more information on how to fix the P1273 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1273 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1273 Acura — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Buick — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Cadillac — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Chevrolet — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Chrysler — A/C Clutch Control Circuit 2 High
- P1273 Dodge — A/C Clutch Control Circuit 2 High
- P1273 Ford — Cylinder #3 High To Low Side Open
- P1273 GMC — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Honda — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Infiniti — Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring
- P1273 Isuzu — Accelerator Pedal Position Sensor 1-3 Correlation
- P1273 Jeep — A/C Clutch Control Circuit 2 High
- P1273 Mazda — Cylinder #3 High To Low Side Open
- P1273 Nissan — Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring
Frequently Asked Questions about P1273 Code
1. What are the common symptoms of OBDII code P1273 related to Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What are the possible causes of OBDII code P1273 indicating Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- Causes may include a faulty air fuel ratio sensor, vacuum leaks, clogged fuel injectors, fuel pressure issues, or a malfunctioning mass airflow sensor.
3. How can I diagnose the root cause of OBDII code P1273 for Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- Diagnosing the issue involves using an OBDII scanner to retrieve the code, checking the air fuel ratio sensor's performance, inspecting for vacuum leaks, and testing fuel system components.
4. Can a DIY enthusiast repair OBDII code P1273 related to Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- While some repairs like replacing the air fuel ratio sensor or fixing vacuum leaks can be done by DIYers, it's recommended to consult a professional for accurate diagnosis and repair.
5. Are there any simple maintenance tips to prevent OBDII code P1273 for Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- Regularly servicing your vehicle, ensuring proper fuel quality, and promptly addressing any engine performance issues can help prevent the occurrence of this code.
6. How urgent is it to address OBDII code P1273 indicating Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- It is advisable to address this code promptly to prevent potential damage to the engine and ensure optimal fuel efficiency and performance.
7. Can driving with OBDII code P1273 related to Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring cause further damage?
- Continuing to drive with this code unresolved may lead to decreased engine efficiency, potential damage to the catalytic converter, and increased emissions.
8. Is it safe to ignore OBDII code P1273 for Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring if the vehicle is running fine?
- Ignoring this code can result in decreased fuel efficiency, poor engine performance, and potential long-term damage, so it's best to address it promptly.
9. How much does it typically cost to repair OBDII code P1273 associated with Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- Repair costs can vary depending on the specific issue, but expenses may include sensor replacement, vacuum leak repair, or fuel system maintenance.
10. Can weather conditions or driving habits affect the occurrence of OBDII code P1273 for Air Fuel Ratio Sensor 1 Bank 1 Lean Shift Monitoring?
- Extreme weather conditions, frequent short trips, or aggressive driving habits can potentially contribute to triggering this code, so it's essential to drive responsibly and maintain your vehicle properly.
Discuss the causes and fixes for P1273 OBDII Code
Code P1273 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
