P1268 Ford Code - Cylinder #8 High To Low Side Short
Quick Answer
The fuel injectors are connected to the high-pressure fuel rail and deliver a calibrated amount of fuel directly into the combustion chamber. Common causes include Faulty Fuel Injector 8, Fuel Injector 8 harness is open or shorted, Fuel Injector 8 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1268 Ford indicates Cylinder #8 High To Low Side Short.
- Common causes
- Common causes include Faulty Fuel Injector 8, Fuel Injector 8 harness is open or shorted, Fuel Injector 8 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1268 Ford Description
What are the Possible Causes of the DTC P1268 Ford?
- Faulty Fuel Injector 8
- Fuel Injector 8 harness is open or shorted
- Fuel Injector 8 circuit poor electrical connection
- Faulty Fuel Injector Interface Module
How to Fix the DTC P1268 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1268 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1268 Ford code?
Need more information on how to fix the P1268 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1268 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1268 Ford Code
1. What are common symptoms of OBDII code P1268 in a Ford vehicle?
Symptoms may include engine misfires, rough idling, loss of power, and possibly an illuminated Check Engine Light.
2. What does the OBDII code P1268 Ford indicate?
The code P1268 indicates a high to low side short in Cylinder #8, which means there is an electrical issue affecting the fuel injector circuit for that specific cylinder.
3. What are possible causes of the Cylinder #8 High To Low Side Short code?
Common causes include a faulty fuel injector, wiring issues, poor electrical connections, or a problem with the Engine Control Module (ECM).
4. How can I diagnose the cause of OBDII code P1268 in my Ford?
Diagnosis typically involves inspecting the wiring and connectors related to the fuel injector in Cylinder #8, testing the fuel injector itself, and checking for any ECM issues using a diagnostic scanner.
5. Can driving with OBDII code P1268 cause further damage to the vehicle?
Continued driving with this issue can lead to poor engine performance, reduced fuel efficiency, and potential damage to the catalytic converter over time.
6. Is it safe to continue driving my Ford with the Cylinder #8 High To Low Side Short code?
It is not recommended to drive the vehicle with this code present, as it can lead to further complications and potential engine damage. It is best to address the issue promptly.
7. How can I repair OBDII code P1268 in my Ford?
Repair options may include replacing the faulty fuel injector, repairing any damaged wiring or connectors, ensuring proper electrical connections, or reprogramming the ECM if needed.
8. Can I reset the Check Engine Light after fixing the issue causing code P1268?
Yes, once the underlying issue causing the code has been resolved, the Check Engine Light can be reset using a diagnostic scanner to clear the trouble code.
9. Are there any preventative measures to avoid OBDII code P1268 in the future?
Regular vehicle maintenance, such as checking and cleaning fuel injectors, inspecting wiring harnesses for damage, and ensuring proper ECM function, can help prevent this code from occurring.
10. Do I need a professional mechanic to fix OBDII code P1268, or can I do it myself?
Depending on your automotive knowledge and skills, you may be able to address the issue yourself by following repair guides and using the necessary tools. However, for complex diagnoses and repairs, it is recommended to consult a professional mechanic.
Discuss the causes and fixes for P1268 Ford OBDII Code
Code P1268 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.