P1261 GMC Code - Cylinder 1,4,6 and 7 High Voltage Circuit Fault
Quick Answer
The Fuel Injection Control Module (FICM) supplies high voltage to each fuel injector on the ignition voltage circuits. Common causes include Faulty Fuel Injection Control Module (FICM), Fuel Injection Control Module (FICM) harness is open or shorted, Fuel Injection Control Module (FICM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1261 GMC indicates Cylinder 1,4,6 and 7 High Voltage Circuit Fault.
- Common causes
- Common causes include Faulty Fuel Injection Control Module (FICM), Fuel Injection Control Module (FICM) harness is open or shorted, Fuel Injection Control Module (FICM) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1261 GMC Description
What are the Possible Causes of the DTC P1261 GMC?
- Faulty Fuel Injection Control Module (FICM)
- Fuel Injection Control Module (FICM) harness is open or shorted
- Fuel Injection Control Module (FICM) circuit poor electrical connection
How to Fix the DTC P1261 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1261 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1261 GMC code?
Need more information on how to fix the P1261 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1261 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1261 GMC Code
1. What are the common symptoms of OBDII code P1261 GMC?
- Common symptoms include engine misfires, rough idling, loss of power, and potential stalling.
2. What causes the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC vehicle?
- The code P1261 is typically caused by issues with the ignition system, such as faulty ignition coils, spark plugs, or wiring.
3. How can I diagnose the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in my GMC?
- Diagnosing P1261 involves checking the ignition components in cylinders 1, 4, 6, and 7, testing the ignition coils, inspecting the spark plugs, and examining the wiring for any faults.
4. Can a DIY enthusiast repair the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC?
- While some DIY enthusiasts may be able to address P1261 by replacing faulty ignition components, it's recommended to seek professional help for a thorough diagnosis and repair.
5. Are there any quick tips to troubleshoot the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC?
- Quick troubleshooting tips include checking for loose or damaged wiring connections, ensuring proper spark plug installation, and inspecting the ignition coils for signs of wear.
6. What are the potential risks of ignoring the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC?
- Ignoring P1261 can lead to further engine damage, reduced fuel efficiency, and potential safety hazards due to decreased performance.
7. How much does it typically cost to repair the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC?
- The cost of repairing P1261 can vary depending on the extent of the issue and the specific components that need to be replaced, but it's advisable to budget for ignition system repairs.
8. Can weather conditions or driving habits trigger the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC?
- While extreme weather or harsh driving conditions may not directly trigger P1261, they can exacerbate existing issues with the ignition system, leading to the fault code.
9. Is it safe to continue driving with the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) illuminated in a GMC?
- It's generally not recommended to drive with the P1261 fault code active, as it can cause engine performance issues and potentially lead to more severe problems over time.
10. How long does it typically take to repair the Cylinder 1,4,6 and 7 High Voltage Circuit Fault (P1261) in a GMC?
- The repair time for P1261 can vary depending on the specific diagnosis and the availability of parts, but it's advisable to consult with a mechanic for a more accurate estimate.
Discuss the causes and fixes for P1261 GMC OBDII Code
Code P1261 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
