P1248 Honda Code - Accelerator Pedal Position Sensor 1 and 2 Incorrect correlation
Quick Answer
P1248 Honda indicates Accelerator Pedal Position Sensor 1 and 2 Incorrect correlation. Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1248 Honda indicates Accelerator Pedal Position Sensor 1 and 2 Incorrect correlation.
- Common causes
- Common causes include Faulty Accelerator Pedal Position Sensor, Accelerator Pedal Position Sensor harness is open or shorted, Accelerator Pedal Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1248 Honda Description
What are the Possible Causes of the DTC P1248 Honda?
- Faulty Accelerator Pedal Position Sensor
- Accelerator Pedal Position Sensor harness is open or shorted
- Accelerator Pedal Position Sensor circuit poor electrical connection
How to Fix the DTC P1248 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1248 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1248 Honda code?
Need more information on how to fix the P1248 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1248 Honda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1248 Honda Code
1. What are the common symptoms of OBDII code P1248 in a Honda related to the Accelerator Pedal Position Sensor?
The common symptoms include rough idle, decreased engine performance, hesitation during acceleration, and potentially triggering the vehicle into "limp mode."
2. What can cause the OBDII code P1248 in a Honda indicating an incorrect correlation between Accelerator Pedal Position Sensor 1 and 2?
Possible causes can include a faulty Accelerator Pedal Position Sensor, damaged wiring or connectors, issues with the throttle body, or a problem with the Engine Control Module (ECM).
3. How can I diagnose the Accelerator Pedal Position Sensor issue triggering code P1248 in my Honda?
Diagnosis involves using a scan tool to read the trouble codes and then checking the functionality of the Accelerator Pedal Position Sensors, inspecting the wiring for any damage, and testing the throttle body for proper operation.
4. Are there any quick checks or fixes I can try before taking my Honda to a mechanic for the P1248 code related to the Accelerator Pedal Position Sensor?
You can start by ensuring the connectors related to the Accelerator Pedal Position Sensors are securely plugged in and not damaged. Sometimes, a simple reset of the ECM by disconnecting the battery for a few minutes can also resolve temporary issues.
5. Can driving with the OBDII code P1248 in a Honda indicating Accelerator Pedal Position Sensor problems cause further damage to the vehicle?
Continuing to drive with this issue can potentially cause damage to other engine components over time, as the vehicle may not operate optimally and could lead to poor fuel efficiency or drivability problems.
6. How much does it typically cost to repair the Accelerator Pedal Position Sensor problem triggering code P1248 in a Honda?
The cost of repair can vary depending on the exact cause of the issue. It could range from a simple sensor replacement costing around $100-$200 to more extensive repairs involving wiring or ECM issues, which could cost several hundred dollars.
7. Can I fix the Accelerator Pedal Position Sensor correlation problem causing code P1248 in my Honda by myself, or do I need a professional mechanic?
While simple fixes like sensor replacement or checking connectors can be done by DIY enthusiasts, more complex issues related to wiring or ECM may require the expertise of a professional mechanic to ensure proper diagnosis and repair.
8. Is it safe to continue driving my Honda with the OBDII code P1248 indicating Accelerator Pedal Position Sensor issues if the symptoms are not severe?
It is not recommended to drive the vehicle for an extended period with unresolved sensor issues, as this can impact the overall performance and potentially lead to more significant problems down the line. It's best to address the problem promptly.
9. How long does it typically take to repair the Accelerator Pedal Position Sensor issue causing code P1248 in a Honda?
The repair time can vary based on the exact cause of the problem and the availability of parts. Simple sensor replacements can usually be done within an hour or two, while more complex issues may require a day or more depending on the extent of the repair needed.
10. Will resetting the OBDII code P1248 related to the Accelerator Pedal Position Sensor on my Honda make the problem disappear permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue with the Accelerator Pedal Position Sensor or related components is not addressed, the problem is likely to reoccur. It's essential to diagnose and fix the root cause of the code for a permanent solution.
Discuss the causes and fixes for P1248 Honda OBDII Code
Code P1248 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
