P1244 Subaru Code - Wastegate Control Solenoid Valve Malfunction Low Input
Quick Answer
P1244 Subaru indicates Wastegate Control Solenoid Valve Malfunction Low Input. Common causes include Faulty Wastegate Control Solenoid Valve, Wastegate Control Solenoid Valve harness is open or shorted, Wastegate Control Solenoid Valve circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1244 Subaru indicates Wastegate Control Solenoid Valve Malfunction Low Input.
- Common causes
- Common causes include Faulty Wastegate Control Solenoid Valve, Wastegate Control Solenoid Valve harness is open or shorted, Wastegate Control Solenoid Valve circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1244 Subaru Description
What are the Possible Causes of the DTC P1244 Subaru?
- Faulty Wastegate Control Solenoid Valve
- Wastegate Control Solenoid Valve harness is open or shorted
- Wastegate Control Solenoid Valve circuit poor electrical connection
How to Fix the DTC P1244 Subaru?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1244 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1244 Subaru code?
Need more information on how to fix the P1244 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1244 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1244 Subaru Code
What does the OBDII code P1244 mean on a Subaru?
1. P1244 indicates a "Wastegate Control Solenoid Valve Malfunction Low Input," meaning the ECU has detected an issue with the wastegate control solenoid, typically involving low voltage or improper operation. 2.
What are the common symptoms of code P1244 in a Subaru?
Symptoms may include reduced engine performance, poor turbocharger response, lower boost levels, a check engine light, and potential limp mode activation. 3.
What causes the P1244 code to be triggered?
The most common causes include a faulty wastegate control solenoid, damaged or corroded wiring, a poor electrical connection, or a malfunctioning ECU. 4.
Can a clogged vacuum line cause the P1244 code?
Yes, a clogged or leaking vacuum line can disrupt the wastegate control solenoid's operation and trigger the P1244 code. 5.
How do I diagnose the P1244 code on my Subaru?
Start by inspecting the wastegate control solenoid, wiring, and connections. Use a multimeter to test for proper voltage and continuity, and check for vacuum leaks. 6.
Is it safe to drive with the P1244 code on a Subaru?
Driving with the P1244 code is not recommended, as it may result in reduced turbo performance or cause additional damage to the engine or turbocharger. 7.
How do I fix the P1244 code on a Subaru?
Repairs may include replacing the wastegate control solenoid, repairing damaged wiring, cleaning or replacing vacuum lines, or updating the ECU software if needed. 8.
Can a faulty turbocharger cause the P1244 code?
While less common, a malfunctioning turbocharger or wastegate mechanism can contribute to the P1244 code if it disrupts the solenoid's operation. 9.
What tools are needed to troubleshoot the P1244 code?
Tools may include an OBDII scanner, a multimeter, vacuum gauge, and basic hand tools for inspecting and replacing components. 10.
How much does it cost to repair the P1244 code on a Subaru?
The repair cost depends on the issue. Replacing the wastegate solenoid typically costs $100-$300, while wiring or vacuum line repairs may cost less. Labor charges vary by location.
Discuss the causes and fixes for P1244 Subaru OBDII Code
Code P1244 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
