P1233 2011 Ford Fusion Code - Fuel Pump Driver Module Disabled Or Off Line
Quick Answer
The Powertrain Control Module (PCM) monitors the Fuel Pump Monitor (FPM) circuit from the Fuel Pump Driver Module (FPDM). Common causes include Inertia fuel shutoff (IFS) switch needs to be reset, Faulty Fuel Pump Driver Module (FPDM), Fuel Pump Driver Module (FPDM) harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1233 2011 Ford Fusion indicates Fuel Pump Driver Module Disabled Or Off Line .
- Common causes
- Common causes include Inertia fuel shutoff (IFS) switch needs to be reset, Faulty Fuel Pump Driver Module (FPDM), Fuel Pump Driver Module (FPDM) harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1233 2011 Ford Fusion Description
What are the Possible Causes of the DTC P1233 2011 Ford Fusion?
- Inertia fuel shutoff (IFS) switch needs to be reset
- Faulty Fuel Pump Driver Module (FPDM)
- Fuel Pump Driver Module (FPDM) harness is open or shorted
- Fuel Pump Driver Module (FPDM) circuit poor electrical connection
- Faulty Inertia Fuel Shutoff (IFS) switch
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P1233 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
1. Disconnect the inertia switch harness connector
2. Turn key to ON position (Engine OFF)
3. Measure voltage of circuit between inertia switch harness connector and ground
4. If battery voltage is found, replaced Inertia Switch
5. Clear codes.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1233 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1233 2011 Ford Fusion code?
Need more information on how to fix the P1233 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1233 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1233 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P1233 in a 2011 Ford Fusion?
- Common symptoms include engine stalling, difficulty starting the vehicle, loss of power, and the vehicle going into "limp mode."
2. What does the OBDII code P1233 on a 2011 Ford Fusion indicate?
- The code P1233 indicates that the Fuel Pump Driver Module is disabled or offline, affecting the fuel delivery system.
3. What are the possible causes of the Fuel Pump Driver Module being disabled or offline in a 2011 Ford Fusion?
- Possible causes include a faulty fuel pump driver module, wiring issues, a blown fuse, a defective fuel pump, or a software glitch.
4. How can I diagnose the Fuel Pump Driver Module issue in my 2011 Ford Fusion?
- Diagnosis typically involves checking the fuel pump driver module for power and ground, inspecting the wiring for any damage, and scanning for additional fault codes.
5. Can I still drive my 2011 Ford Fusion with the P1233 code present?
- It is not recommended to drive the vehicle with the P1233 code present, as it can lead to potential safety issues and further damage to the fuel system.
6. Is it possible to reset the P1233 code in a 2011 Ford Fusion?
- Resetting the code may temporarily clear the warning, but it is crucial to address the underlying issue causing the code to prevent it from reoccurring.
7. How much does it typically cost to repair the Fuel Pump Driver Module issue in a 2011 Ford Fusion?
- The cost of repair can vary depending on the exact cause of the problem, but it may range from $200 to $600, including parts and labor.
8. Can a DIY enthusiast fix the P1233 code issue in a 2011 Ford Fusion?
- While some DIYers with automotive experience may be able to diagnose and repair the issue, it is recommended to consult a professional mechanic for complex electrical issues.
9. Will the P1233 code cause permanent damage to the 2011 Ford Fusion if left unaddressed?
- Ignoring the P1233 code can potentially lead to fuel system issues, engine performance problems, and even long-term damage if the root cause is not resolved promptly.
10. How long does it take to repair the Fuel Pump Driver Module issue in a 2011 Ford Fusion?
- The repair time can vary based on the specific diagnosis and repair needed, but it typically takes a few hours to half a day for a professional mechanic to address the P1233 code.
Discuss the causes and fixes for P1233 2011 Ford Fusion OBDII Code
Code P1233 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
