P1225 2008 Nissan Rogue Code - Closed Throttle Position Learning Performance Problem
Quick Answer
Electric Throttle Control Actuator consists of throttle control motor, throttle position sensor, etc. Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1225 2008 Nissan Rogue indicates Closed Throttle Position Learning Performance Problem.
- Common causes
- Common causes include Faulty Electric throttle control actuator (TP sensor 2), Electric throttle control actuator (TP sensor 2) harness is open or shorted, Electric throttle control actuator (TP sensor 2) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1225 2008 Nissan Rogue Description
The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the Engine Control Module (ECM). In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.
What are the Possible Causes of the DTC P1225 2008 Nissan Rogue?
- Faulty Electric throttle control actuator (TP sensor 2)
- Electric throttle control actuator (TP sensor 2) harness is open or shorted
- Electric throttle control actuator (TP sensor 2) circuit poor electrical connection
How to Fix the DTC P1225 2008 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
Nissan Rogue Idle Air Volume Relearn
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1225 2008 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1225 2008 Nissan Rogue code?
Need more information on how to fix the P1225 2008 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1225 2008 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1225 2008 Nissan Rogue Code
1. What are the common symptoms of OBDII code P1225 in a 2008 Nissan Rogue?
The common symptoms of OBDII code P1225 in a 2008 Nissan Rogue include rough idling, poor acceleration, and potential stalling of the engine.
2. What does the OBDII code P1225 in a 2008 Nissan Rogue indicate?
The OBDII code P1225 in a 2008 Nissan Rogue indicates a Closed Throttle Position Learning Performance Problem, specifically related to the throttle position sensor.
3. What are the possible causes of OBDII code P1225 in a 2008 Nissan Rogue?
Possible causes of OBDII code P1225 in a 2008 Nissan Rogue include a faulty throttle position sensor, issues with the throttle body, wiring problems, or a malfunctioning Engine Control Module (ECM).
4. How can I diagnose the OBDII code P1225 in my 2008 Nissan Rogue?
To diagnose the OBDII code P1225 in a 2008 Nissan Rogue, you can use an OBDII scanner to retrieve the specific fault code, visually inspect the throttle position sensor and related components, and perform a thorough check of the wiring connections.
5. Can I still drive my 2008 Nissan Rogue with OBDII code P1225?
It is not recommended to drive your 2008 Nissan Rogue with OBDII code P1225, as it can lead to poor engine performance and potential safety risks. It's best to address the issue promptly.
6. How can I repair OBDII code P1225 in my 2008 Nissan Rogue?
To repair OBDII code P1225 in a 2008 Nissan Rogue, you may need to replace the throttle position sensor, repair any damaged wiring, clean or replace the throttle body, or reprogram the ECM if necessary.
7. Is it possible to reset the OBDII code P1225 in a 2008 Nissan Rogue?
Resetting the OBDII code P1225 in a 2008 Nissan Rogue can be done by clearing the fault code with an OBDII scanner after addressing the underlying issue that triggered the code.
8. How serious is OBDII code P1225 in a 2008 Nissan Rogue?
OBDII code P1225 in a 2008 Nissan Rogue should be taken seriously as it can lead to drivability issues and potential engine performance problems. It's important to diagnose and repair the issue promptly.
9. How much does it cost to repair OBDII code P1225 in a 2008 Nissan Rogue?
The cost to repair OBDII code P1225 in a 2008 Nissan Rogue can vary depending on the specific cause of the issue, but it may involve parts and labor costs for sensor replacement or wiring repairs.
10. Can a DIY enthusiast fix OBDII code P1225 in a 2008 Nissan Rogue?
While some DIY enthusiasts may be able to address OBDII code P1225 in a 2008 Nissan Rogue by replacing the throttle position sensor or checking wiring connections, it's recommended to have a professional diagnosis and repair for more complex issues.
Discuss the causes and fixes for P1225 2008 Nissan Rogue OBDII Code
Code P1225 2008 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
