AutoCodes – MINI – P1223 MINI

P1223 MINI Code - Pedal Position Sensor 2 High Input

Quick Answer

P1223 MINI indicates Pedal Position Sensor 2 High Input. Common causes for P1223 MINI include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1223 MINI indicates Pedal Position Sensor 2 High Input.
Common causes: Common causes for P1223 MINI include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,797

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1223 MINI Description

OBDII Code P1223 MINI - Pedal Position Sensor 2 High Input - AutoCodes.com — P1223 MINI Code - Pedal Position Sensor 2 High Input

How to Fix the DTC P1223 MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1223 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1223 MINI code?

Need more information on how to fix the P1223 MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1223 MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1223 MINI Code

1. What are common symptoms of OBDII code P1223 in a MINI related to the Pedal Position Sensor 2 High Input?

The common symptoms of OBDII code P1223 in a MINI include issues such as poor acceleration, unresponsive throttle, and potential stalling of the vehicle.

2. What are the possible causes of OBDII code P1223 in a MINI indicating Pedal Position Sensor 2 High Input?

Possible causes of OBDII code P1223 in a MINI include a faulty pedal position sensor, damaged wiring or connectors, or issues with the engine control module (ECM).

3. How can I diagnose the OBDII code P1223 in a MINI related to Pedal Position Sensor 2 High Input?

Diagnosing OBDII code P1223 involves using a diagnostic scanner to read the code, testing the pedal position sensor and its wiring for faults, and checking the ECM for any malfunctions.

4. Can I continue driving my MINI with OBDII code P1223 indicating Pedal Position Sensor 2 High Input?

It is not recommended to continue driving your MINI with OBDII code P1223 present, as it can lead to further damage and safety issues due to potential throttle malfunctions.

5. How can I repair OBDII code P1223 in my MINI caused by Pedal Position Sensor 2 High Input?

To repair OBDII code P1223, you may need to replace the pedal position sensor, repair any damaged wiring or connectors, or reprogram the ECM if necessary.

6. Is it possible to reset OBDII code P1223 related to Pedal Position Sensor 2 High Input in a MINI?

Resetting OBDII code P1223 may temporarily clear the code, but it is essential to diagnose and fix the underlying issue to prevent the code from reappearing.

7. Can a DIY enthusiast fix OBDII code P1223 in a MINI themselves?

Depending on your experience and access to tools, a DIY enthusiast may be able to fix OBDII code P1223 by replacing the pedal position sensor or addressing wiring issues, but professional help is recommended for proper diagnosis.

8. How much does it cost to repair OBDII code P1223 in a MINI caused by Pedal Position Sensor 2 High Input?

The cost of repairing OBDII code P1223 can vary depending on the exact cause of the issue, but it may range from $100 to $400, including parts and labor.

9. Are there any preventive measures to avoid OBDII code P1223 related to Pedal Position Sensor 2 High Input in a MINI?

Regular maintenance, such as checking and cleaning the throttle body, inspecting wiring connections, and ensuring proper pedal sensor function, can help prevent OBDII code P1223 from occurring.

10. Will OBDII code P1223 in a MINI reset on its own after the issue is fixed?

After the underlying issue causing OBDII code P1223 is fixed, the code may not reset on its own immediately. It may require clearing by a diagnostic scanner or driving a certain number of cycles before the ECM registers the repair.